Jump to content
SAU Community

Recommended Posts

on swaybars....actually for anyone new at the track....

most important thing (apart from learning how to drive around the track) is to get your tyre pressures right first.

frist thing decide target tyre pressure. If you don't have a specific number try 38 for road tyres, 34 for semi slicks.

It's wakie and its winter...so start with the following cold tyre pressures:

RF target -6

LF target -8

RR target -6

LR target -4

don't worry too much about the first session, just feel your way around the track.

second session give it a warm up lap then 3 hard laps, then come into the pits pretty quick (let the brakes cool a little but don't back off on the tyres). come into pit lane, pull to the side, leave the car running/out of gear/handbrake off.

let the tyre pressures in each tyre down to the target pressure.

then go out and enjoy the day!

Once the tyre pressures are right, if you have adjustable bars set them both to medium. if you get too much understeer back off the rear bar to soft. if you get too much oversteer....maybe try softer front bar, or more front torque if its adjustable, or turn in later, or more progressive throttle out of the corner. If it rolls too much go harder on the front bar. but basically change them from session to session (pretty easy) and see what you like :bunny:

Remember each 3 hole bar has 5 settings because you do not have to adjust them evenly (ie you can have "hard" on one side and "medium" on the other to create "medium/hard")...so there are plenty of settings to confuse you!

hope you got the wheels aligned before you went to the track!

  • Replies 566
  • Created
  • Last Reply

Top Posters In This Topic

nah all good bobby, 8 year old ACL rupture that ive been putting off but know its giving me grief all the time so biting the bullet.

about the car, if you guys are serious about running it im happy too have it ready as i want to test the new sump. have already asked Ando but he reckons he might be too busy.....scared lol.

PM me and let me know. Besides i want to hear it from track-side.

Bring all your tools, and any spare parts you may have.

Bring spare coolant, oil, brake fluid, power steering fluid etc.

You will much rather have it, and not need it, then need it, and not have it...

Ill be bringing my big trolley jack, might bring a few peices of wood for u very low ppl.. trolley jack is 70mm when lowered..

Full Name: Reece McIntosh

Car Type: Clio

Newb or not: Rookie....

Most recent lap time if not newb (can be another track if necessary but make sure you mention which one): 1.11

# of Drivers: 1

# of Passengers & Name: TBA

I left it late, but I will be there :bunny:

yayyy Reece!

and OMG....8 years and Shell enters a track day! You'll have a ball :bunny:

haha it's the first time I've had a "spare" car (even if its a stockers POS) so I don't have to worry about how I'm getting to work on Monday if anything breaks!!

Remember each 3 hole bar has 5 settings because you do not have to adjust them evenly (ie you can have "hard" on one side and "medium" on the other to create "medium/hard")...so there are plenty of settings to confuse you!

orly? Never considered that! Thanks Druncan :D

same...happy to take it for a spin stu!

dave, don't worry there will be plenty of tools there on the day...haven't you met the exec committee :thumbsup:

and OMG....8 years and Shell enters a track day! You'll have a ball :rofl:

See what fresh blood on the commitee does? We get everyone involved!

Full Name: Reece McIntosh

Car Type: Clio

Newb or not: Rookie....

Most recent lap time if not newb (can be another track if necessary but make sure you mention which one): 1.11

# of Drivers: 1

# of Passengers & Name: TBA

I left it late, but I will be there :thumbsup:

about time!!!

Pfft, wouldn't matter what you use, Reece... You could probably put us all to shame while you're riding a Big Wheel - who's old enough to remember those, btw???

Looks like I will only be coming as an "assistant" at this stage. I could get the car going in time but it won't be quite right... and experience tells me that the only outcome from "not quite right" is disapointing and usually quite expensive. So I have decided to leave the girl parked in the garage, where she can't break anything :blush:

I am hopefully still going to come down and if I do am happy to help out where ever I can be used. Last time I had a lot of fun at pit exit ensuring that Neil and JP happened to find themselves rubbing elbows for the same peice of real estate. :) Although this didn't help me find my way out onto said real estate even if in the passengers seat. :)

Passengers can go into other cars, however I'm pretty sure there are quite strict rules about camera equipment inside cars.

Last i checked, a photog holding a camera and shooting while someone is driving, was not allowed.

Ando, correct?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...