Jump to content
SAU Community

Recommended Posts

yeah sorry we didnt get to catch up. I am not that good with cold introductions so didnt manage to chat with many guys I didnt already know! Regarding the intercooler, I wasnt present for the install (phone pic was from the boys in the shop). I know that the intercooler has made the tuning a little more complex but no big deal otherwise. I will get some info together and get back to you.

thanks Mark. def catch up at the next event.

  • 2 weeks later...

beaut car. love all the work that has gone into it.

hey what sort of dr are you?

I need to find a surgeon who will do total knee replacements on a 31yr old; no luck so far

last surgeries had my patella's removed, not good for a 201cm tall bloke. loads of pain, disabled now :down:

  • Nope 1

About 20 hp, mostly due to turbulence caused by having it shut rather than extra flow through the side without the muffler as the magna flow muffler is straight through. When closed there is a dead space in the closed section that likely creates turbulence at the y junction.

Cool thanks for the information.

About 20 hp, mostly due to turbulence caused by having it shut rather than extra flow through the side without the muffler as the magna flow muffler is straight through. When closed there is a dead space in the closed section that likely creates turbulence at the y junction.

The best thing to note is that with our exhaust (3.5" dumps into a 4" centre pipe with 2x 4" rear pipes) and the willall turbo upgrade, we achieved a BETTER THAN STANDARD boost curve! There has been approx 100rpm gain in boost response which, combined with the extra airflow of the larger turbos, provides heaps more torque in the midrange.

this thing sounds horn! I'm not game to nail it but I can say that by the sound it has it WILL go.

those that have seen it would have noted the camera setup. I had a problem to sort on that this morning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...