Jump to content
SAU Community

Recommended Posts

hey people, just picked up a 1997 r33 gts-t m-spec with rb25det. im fairly new to world of imports, this is the first one ive owned. i too have the famous crunch from 1st to 2nd.

just wondering where i can get my hands on some redline shockproof? also does it come in different grades? if so, what grade is recommended for those gearboxes? also if anyone knows how much oil they hold would be much appreciated.

also, the car is pretty well standard engine wise, apart from splitfire coils, walbro fuel pump, k&n panel filter and 3 inch catback exhaust. the factory dual stage boost solenoid has been disconnected and a boost tee fitted up running a constant 9psi. is there anything i can do to give it a bit more punch without sacrificing fuel economy? winding up the boost is obviously an easy fix for grunt, but not for fuel. it just sounds so held back. just wondering if theres things i can do without spending mega bucks.

any comments would be a great help. cheers.

Link to comment
https://www.sau.com.au/forums/topic/330180-r33-gts-t-rb25-gearbox/
Share on other sites

hey people, just picked up a 1997 r33 gts-t m-spec with rb25det. im fairly new to world of imports, this is the first one ive owned. i too have the famous crunch from 1st to 2nd.

just wondering where i can get my hands on some redline shockproof? also does it come in different grades? if so, what grade is recommended for those gearboxes? also if anyone knows how much oil they hold would be much appreciated.

also, the car is pretty well standard engine wise, apart from splitfire coils, walbro fuel pump, k&n panel filter and 3 inch catback exhaust. the factory dual stage boost solenoid has been disconnected and a boost tee fitted up running a constant 9psi. is there anything i can do to give it a bit more punch without sacrificing fuel economy? winding up the boost is obviously an easy fix for grunt, but not for fuel. it just sounds so held back. just wondering if theres things i can do without spending mega bucks.

any comments would be a great help. cheers.

Get a 3in front pipe with split dump. Wind the boost up a little more unless you get R&R (do a search) and then knock it back until it comes right. Swap the R33 smic for an R34 one (straight swap - should be able to pick one up for under $100)
rb25det takes about 3.5 litres (or until it starts coming out of the fill hole quicker than you can pump it in)

Any one else had their 25 box throwing oil out of the breather?

also running redline lite weight shock proof

Noticed mine was doing this after a drift day, box was not over filled.

should i put a small breather tank, high in the engine bay for the gear box?

Any one else had their 25 box throwing oil out of the breather?

also running redline lite weight shock proof

Noticed mine was doing this after a drift day, box was not over filled.

should i put a small breather tank, high in the engine bay for the gear box?

Elite Racing on here has said there was a bad batch of shockproof that has been spitting the fluid out the breathers

post from another site...

"we recommend using redline super lightweight in nissan boxes, it is equivalent to say vmx80 castrol which is a recommended oil for factory boxes. the lightweight shockproof is a bit too heavy and you will feel shift harshness until warm.however the super lightweight shockproof is far superior to any oil we have tested and used. the lightweight oil is a better oil in relation to load carrying capacity but can annoy people on cold shifts thats all. the redline product is great all round. "

http://www.nissansilvia.com/forums/index.p...howtopic=293723 for the rest of the story...

.. No oil will magically fix your gearbox, when its old it old, kinda like arthritis... :)

  • 2 years later...

Now im bumping this thread a bit.

I have the same problem as murph on my Rb25det

my gearbox throws up oil from the breather, i have also redline's shockproof lighweigt oil.

it startet last year and it keept throw up even when i changed the oil so it maybe was a bad batch.

and for this year i bought a second gearbox and the redline oil, keeps throwing up oil from the breather

What is the problem?? Is it the oil,? it must be becaus the guy i bought the second gearbox from had no leaks.

Regards / Anders

The new shockproof seems to climb out of breathers, afew people have reported this. I think ERD mentioned it and did everything Redline recommended by extending the breathers etc but still didn't help.

  • 1 year later...

Hi guys, digging up an old thread, I may have a similar problem.

I had a look under the car after a long country drive to find a fair bit of blue gearbox oil at the rear of the gearbox and on the crossmember. The car's also recently been on the dyno so it may be from that too. It's an R34 GTT with R34 RB25DET gearbox and Redline Lightweight Shockproof.

I couldn't find a clear source where the oil may be coming out, whereabouts is the breather on these boxes?

How do I check how much oil is left in the box? Can I just undo the driver side 1/2" plug on a level surface?

Its hard to say if it will fix it when noone knows what is actually causing the noise. If the box is wrecked nothing will fix it. I have a noise in 5th and 3rd and not even a gearbox rebuilt fixed it. Must be a problem with the gears themselves but it's just a noise and not a very loud one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
    • I see you've never had to push start your own car... You could save some weight right now...
×
×
  • Create New...