Jump to content
SAU Community

Finally, How To Stop Getting Defected!

N1GTR

By N1GTR,
in New South Wales

 Share

Recommended Posts

J34 Proficient

J34

Posted
Posted

Hmm this might be something worth looking into, yesterday morning I saw two cop cars making a huge scene over a 300ZX a street away from where I live. Two guys with torches one in plain clothes and thongs going nuts under the bonnet. Didn't see much other than a exhaust so not sure why they were making a big deal.

So whats the go with a eng certif? Can you still get defected at all?

krayzie32 Mentor

krayzie32

Posted
Posted
Threads been deleted by site admin. Sorry guys, out of my hands.

who are the site admins???

Anyways i thought the group buy wouldve been good idea...

Obiously to some its not...

So who was going to do the engineering?

Id like to do mine when its back on the road

STRETCH Community Regular

STRETCH

Posted
Posted

an engineers report wont stop you getting defected but if you have one and produce it when pulled over we find that 8 out of 10 they will leave you alone. alot comes down to your attitude but if a cop see's that your trying to do the right thing they usually leave you alone. As for epa . they are not concerned about engineers reports but only the pollution side of cars. they dont like pod fillter covers or homemade air box's front mounts or external bov. they will however leave you alone if you have had a recent emission test and passed.

MrStabby Grand Master

MrStabby

Posted
Posted
an engineers report wont stop you getting defected but if you have one and produce it when pulled over we find that 8 out of 10 they will leave you alone. alot comes down to your attitude but if a cop see's that your trying to do the right thing they usually leave you alone.

AND if you did get a defect you would probably be able to follow that up with a complaint. You could even politely ask the officer on what grounds he was defecting you and if they weren't able to offer a reasonable case for it, you could suggest that you will make a complaint.... Of course, you need to be careful if you're going to play hardball.

UWISSH! Grand Master

UWISSH!

Posted
Posted

correct me if im wrong but all an engineers report does is tell who ever is looking at it that its all done in a safe and propper way, doesnt change that mods on the cars are illegal.

anyway most times u get sent to the epa so paying for an engineers report wil do sweet f.a for you

MBS206 Grand Master

MBS206

Posted
Posted
correct me if im wrong but all an engineers report does is tell who ever is looking at it that its all done in a safe and propper way, doesnt change that mods on the cars are illegal.

anyway most times u get sent to the epa so paying for an engineers report wil do sweet f.a for you

Safe and proper means legal.

If you get the emmisions certificate done, it states that your car already meets emmisions which means a big waste of time to send you there again to be tested.

After I got my eng cert I never even got any more "random pullovers"

malcolm Community Regular

malcolm

Posted
Posted

... without sounding too much like a complete idiot but wouldnt getting pulled over & not getting defected be as simple as not having anything to defect on, in or under your car ?? ...

... am i just getting old but who wants to have an unsafe, illegal, dodgy car that could potentially hurt you or even worse hurt someone else ?? ...

... having enough brains to hold a drivers licence should qualify you with enough intelligence to equip your car in a 100% roadworthy, legal & safe manner ...

... if it aint then dont drive it till it is ...

... not driving it while its being properly equipped will absolutely guarantee you wont get defected !! ...

... just as i thought - simple !! ... :) ...

Blitz Grand Master

Blitz

Posted
Posted
Safe and proper means legal.

If you get the emmisions certificate done, it states that your car already meets emmisions which means a big waste of time to send you there again to be tested.

After I got my eng cert I never even got any more "random pullovers"

Matt, a big waste of who's time exactly? Not the officer's, but yours.

Don't get me wrong, the report, and having it lodged against your registration helps, particularly when Police are following you, running your plates, and preparing to pull you over, but they are not stupid, and put plainly, engineers report or not, if they suspect that your car is too loud or may not meet the emissions standard, then they can issue you with a notice at their discretion.

Engineers reports have always been fairly easy to come by, and the old 'remove mods or detune to meet the standards and get the report then replace them' trick is something they are well aware of.

I think its important that others aren't reading this thread thinking that getting this done will guarantee defect immunity.

Blitz Grand Master

Blitz

Posted
Posted
correct me if im wrong but all an engineers report does is tell who ever is looking at it that its all done in a safe and propper way, doesnt change that mods on the cars are illegal.

anyway most times u get sent to the epa so paying for an engineers report wil do sweet f.a for you

Engineering isn't just about 'safe', its about achieving FULL compliance with the ADR's and regulations that apply to your particular vehicle.

Illegal mods cannot be legitimately engineered.

There are however 2 classes of permissible modifications, owner certified (minor) or engineer certified, the later being where provided a qualified engineer signs off to say that the modifications don't contravene ADR's and your vehicle still meets the standards.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...