Jump to content
SAU Community

Recommended Posts

I know we're trying to get them translated and all, but who knows if/when that'll come through; fingers crossed it does but in the mean time I stumbled across these, and whilst there in Japanese I'm sure some of you want to have a look over them. Im still piecing bits and bobs together, but from what i can ascertain it seems to be pretty relevant to our interests. If you've never opened a PDF with Japanese fonts before, Adobe Reader may should you that you need the fonts & download them automatically (thats what mine did at least)

Basic Engine

Lubricated system

Cooling System

Engine Control

Fuel Systems

Exhaust system

Accelerator Control

Transmission

I hope Im allowed to post this? :)

Edited by Dunc
Link to comment
https://www.sau.com.au/forums/topic/332175-m35-workshop-manuals/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Awesome find Dunc :) This is a great help, I so needed this. I've been looking for something before I rip the intake apart as we still might have a long wait for the translation so this is just perfect.

I just need to find the interior & trim section now to make pulling that apart easier. I hate not having info for this, nothing worse than breaking a lug or something the first time you do it. Wouldn't happen to have this as well, that would totally make my day :) .

Awesome find Dunc :P This is a great help, I so needed this. I've been looking for something before I rip the intake apart as we still might have a long wait for the translation so this is just perfect.

I just need to find the interior & trim section now to make pulling that apart easier. I hate not having info for this, nothing worse than breaking a lug or something the first time you do it. Wouldn't happen to have this as well, that would totally make my day :O .

Roof

Exterior & Interior

Instrument Panel

From the 'Drive Line / Axel' section

Transfer

Front Axel Drive Shaft

Rear Axel Drive Shaft

Drive Shaft

Front Diff

Rear Diff

I'll see if I can work out the electronics section shortly :huh:

Edited by Dunc
Roof

Exterior & Interior

Instrument Panel

From the 'Drive Line / Axel' section

Transfer

Front Axel Drive Shaft

Rear Axel Drive Shaft

Drive Shaft

Front Diff

Rear Diff

I'll see if I can work out the electronics section shortly :huh:

Dude, thank you, that is just so good. Ask and you shall receive. :O

Got lots of little things I'd like to do (& fix) around the car and these just make it so much easier & quicker. :P

Edited by Blade NZ
I know we're trying to get them translated and all, but who knows if/when that'll come through; fingers crossed it does but in the mean time I stumbled across these, and whilst there in Japanese I'm sure some of you want to have a look over them. Im still piecing bits and bobs together, but from what i can ascertain it seems to be pretty relevant to our interests. If you've never opened a PDF with Japanese fonts before, Adobe Reader may should you that you need the fonts & download them automatically (thats what mine did at least)

Basic Engine

Lubricated system

Cooling System

Engine Control

Fuel Systems

Exhaust system

Accelerator Control

Transmission

Hey Dunc to ease translation I need the original address .Can you provide- Brett

I hope Im allowed to post this? :/

see if they have the later model 'series 2' books also, there are 2 of them!

again, nice work on the find and additional PDFs!

Its only for the M35 models unfortunately. I can see if I can get my hands on something similar to the C34's, but I cant make any promises :/

And Brett, theres no 'original address/website' that I got these from, its from a disc which Im presumed is meant for mechanics or workshops. It has a web interface to schematics, but of course all of thats in japanese too. When I have time I'll try and get much of it online, theres a LOT of detail in them which Im not sure is necessarily in the PDFs Ive got (eg the pin out schematic for the ECU)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...