Jump to content
SAU Community

Recommended Posts

I've put iridiums in etc and it keeps fouling them, it's always the same, starts getting hesitation up over 4k revs on load. revs just fine to redline when not loaded up.

have used standard gaps to begin with, only the usual issues. went .8 gap they lasted an extra couple of months. last time went one heat range colder and gaped to .8, last longer but now it's happening again. basically I get a year out of iridiums. Should I just buy copper and keep replacing them ? is that normal wear on them? I was under the impression they should last allot longer.

I was thinking that there was something maybe wrong with my tune? they are supposed to last for 100$ or is that just bs? I thought fouling plugs every 20$k was what you would expect from copper or if something was fuged in the tune?

So what was the heat range of the last set of plugs you fitted?

What mods do you have that might affect the heat range requirement of the plugs? If they are fouling, maybe the injectors are delivering too much fuel. Or maybe the timing is inappropriate to support any mods you have.

The last set was one heat range colder but they showed slight signs of burning to hot for the plugs, slightly white so ill get a set of copper in the original heat range again.

baseline: it's all working cept a slight leak in the steering rack but that's not a massive performance issue >:rofl: replaced timing belt, replaced cam gears to "easily adjustable".

mods: usual "stage 1" engy mods.

fmic, 3" straight through exhuast. 2530 hair dryer. fuel pump was replaced with intank bosch outa fear, greddy ult to fool with the sensors. she could probably do allot better with a replacement ecu but not 1500 better so thats it.

i need to replace mine after a week if i move the car from the garage to the lawn to wash the thing haha....3 months out of a set of plugs is good for me and if copper plugs are good for close to 500atw then i cant complain for $30 a set

just like everyone says platinum plugs are a waste of $$

coppers are fine, and because they're cheap most people just replace them if they get fouled.

i replaced mine after a year, they weren't in too bad condition but i was doing coil packs and just decided to replace the plugs too because its just so cheap.

I do mine with oil every 5000km. You could also look at bosch plats, ~$40 for 6 from repco, they go pretty well. Not sure how long they last, prob not much longer than the coppers...

Thats pretty keen changing them every 5,000km on a stock car!

Thats pretty keen changing them every 5,000km on a stock car!

Finally got new coilpacks 2 weeks ago so I'll see how long they last. Car is pretty stock, tho i wrote "stock" a long time ago, before I realised that 14psi is not stock boost. The car's history is unknown lol.

Heaps of people on here just change plugs with oil to keep the car fresh and avoid misfires.

I do mine with oil every 5000km. You could also look at bosch plats, ~$40 for 6 from repco, they go pretty well. Not sure how long they last, prob not much longer than the coppers...

I do that too. Keeps it all fresh :D Only takes 30 mins or so extra. I just do it while its draining haha.

Hence the reason you don't waste money on platinums and iridums in our cars. Waste of money as you never get the mileage out of them compared to using them on a normal car.

+1

Been saying it for years, even the Spark Plug 101 thread covers this off...

Yet people still waste money on iridi/plati :D

Probably not helped by a shit tune or poor plug heat selection though as a side point.

Either way go back to the normal coppers

The last set was one heat range colder but they showed slight signs of burning to hot for the plugs, slightly white so ill get a set of copper in the original heat range again.

what bloody heat range were they (other than "cloder than previous")???????? moreover, which actual model of plug were they?

+1

Been saying it for years, even the Spark Plug 101 thread covers this off...

Yet people still waste money on iridi/plati :D

Probably not helped by a shit tune or poor plug heat selection though as a side point.

Either way go back to the normal coppers

Yeah I feel like I keep constantly telling it to people as well.

never had a problem with plat / iri plugs, except for a recent intermittent misfire that fouled one. turned out to be a faulty (splitfire) coil, but i fitted a set of coppers while diagnosing the problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...