Jump to content
SAU Community

Recommended Posts

Well all that was an interesting read, dyno time will tell. I have some cameras including an endoscope so it will be easy to have a look on power runs. As usual I'm not chasing big power out of this new engine and if we see anything over 300 kilowatts we will be turning the boost down.  

More updates, turns out my neighbor was a sign maker, so I bought some carbon wrap and got him to do the door trims that were in desperate need of a re-fresh, they turned out awesome.

I made a cable for the boost controller, so I can change from low boost to high boost from the steering wheel and make it so I can remove the wheel completely. I was just going to use old school phone cable but thought the wires were too small so I found a 240volt cable in ebay. Now to search all my boxes and find the horn pad and wire up the horns which I'll need to buy.

IMG_0412.JPG

IMG_0413.JPG

IMG_0416.JPG

IMG_0417.JPG

  • Like 5
  • 8 months later...
On 13/02/2023 at 5:03 PM, Neil said:

...Just as a heads up, I will die before Cheryl is sold....

So it turns out that is indeed what happened, and as Mel is not taking up racing and nor is their only child Lizzy the Great Dane, I am tidying the car up for sale.  

As far as I can tell it is pretty much ready to go to the dyno for run in and tune, but I'll update in here once I know more.

20250106_114111.jpg

  • Sad 6

So, starting with the rear brakes.

They look like standard R33 GTST, and will need new pads shortly (less than 5mm material, probably only 1 day left). The slotted discs (probably DBA) are near new at 18.01mm and the lines are braided

image.jpeg

Front brakes are G4 8 pot calipers over 330mm discs with braided lines. Everything looks good, pretty sure these are off my old 350.

Pads are brand new and judging from gold colour are Winmax which is what I also run on my race car, Neil and I both sourced brake stuff from Matty at Racebrakes Sydney who really knows his stuff

image.jpeg

Everything has bled up nicely with all new Motul RBF600 fluid, there were 2 loose hard line connections and the calipers were new on the car so I ended up doing it 3 times but it is perfect now

  • Like 1

Clutch hydraulics are also all good, looks like a brand new slave cylinder and everything bled up well.

No idea what the actual clutch is, and I don't intend to pull the box off on the floor to find out, so unless we have trouble on the dyno or at shakedown that will remain a mystery for the new owner

  • Like 2

yeah for sure.....remember to put your tools away at the end of each day kids! 

Actually it has been kinda nice working on the car, lots of memories of good times. I can pretty much hear him telling me off for stuff still.

Next, shocks/springs/swaybars

It has Sydneykid valved Bilsteins with HKS pillow ball hats all round.

image.jpeg

image.jpeg

Springs are Eibach race springs on adjustable height platforms, with helper springs in the rear to stop rattling. These are 250 all around but easy to change for something else if required.

Swaybars are powdercoated blue but would be Selby's/Whiteline solid adjustables, 21mm rear and 24mm front. Bushes and links in good condition

image.jpeg

All in good condition, no sign of leaks/damage etc

Front lower control arm is standard with new ball joints, tension rod looks like JJR spherical. Front upper control arm is standard with adjustable bushes in the outside end

 image.jpeg  

Rear arms are all nismo, surprisingly all the bushes at either end look standard but in good conditionimage.jpeg

Subframe has standard bushes with lock collars

image.jpeg

HICAS has a lock bar with standard ball joints at the hub end

image.jpeg

A few other things to round out the chassis mechanical checks.

Diff is nice and full of new oil, pretty sure it is Castrol VMX (I run the same on Award's recommendation). I didn't pull the cover to check, but I'm 90% sure the diff centre is a nismo mechanical (old school, not the gt pro).

Gearbox is also nice and full of fresh oil, not sure what it is but not redline.

Tailshaft bearing looks OK and a tailshaft loop is in place

image.jpeg

Did a coolant pressure test overnight and it was back at 0 by morning....after some stuffing around I worked out it was the water return fitting at the turbo that was leaking, it all held pressure correctly once that was nipped up.

No brand mark on the radiator but I'd bet it is a 40mm cooling pro, with standard clutch and fan

I do need to remember to change the water out for coolant once the engine is run in but otherwise cooling looks all good.

2 minutes ago, fatz said:

How much ya asking drunkan 

I'll send you a message, but until I know what is OK (and anything that isn't) its kind of hard to work out a fair price. BTW I'm just helping out here, ultimately it is Mel's call what she accepts but I know it will go sooner or later.

Onto intake pressure test. I have a Raceworks (damn brand thieves!) pressure test adapter that lets you apply pressure through a standard tyre valve and comes with a pressure gauge.....I just blocked off the other end immediately before the throttle body.

Applied 30psi....and the turbo intake immediately popped off with a bang. Sorted that but it was still leaking, turns out there is a pinhole leak at the BOV adapter that I'll have to find a local place to TIG up. I'm sure it makes SFA difference with such a small leak but I want it to be right.

Everything else up to the throttle body was good.

Also cleaned and oiled the KNX cone filter, and this is the AFM if anyone can identify it (car runs a PowerFC)

image.jpeg

Quick side trip into the engine externals, alternator and PS were in place including tensioned belts, but the PS was dry (my guess is he had the steering rack reco-ed). Filled it up with Transmax Z but it will need more bleeding once the engine is running no doubt.

BTW I've said before, I don't know what kind of soft animals you have in the city, but out here they breed the rats tough. I bet they were disappointed when they tasted synthetic ATF....

20250107_154713.jpg

Coilpacks are Splitfires with a factory loom in reasonable condition.

image.jpeg

I didn't pull one put I bet the spark plugs are new as its a new engine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...