Jump to content
SAU Community

Recommended Posts

Well all that was an interesting read, dyno time will tell. I have some cameras including an endoscope so it will be easy to have a look on power runs. As usual I'm not chasing big power out of this new engine and if we see anything over 300 kilowatts we will be turning the boost down.  

More updates, turns out my neighbor was a sign maker, so I bought some carbon wrap and got him to do the door trims that were in desperate need of a re-fresh, they turned out awesome.

I made a cable for the boost controller, so I can change from low boost to high boost from the steering wheel and make it so I can remove the wheel completely. I was just going to use old school phone cable but thought the wires were too small so I found a 240volt cable in ebay. Now to search all my boxes and find the horn pad and wire up the horns which I'll need to buy.

IMG_0412.JPG

IMG_0413.JPG

IMG_0416.JPG

IMG_0417.JPG

  • Like 5
  • 8 months later...
On 13/02/2023 at 5:03 PM, Neil said:

...Just as a heads up, I will die before Cheryl is sold....

So it turns out that is indeed what happened, and as Mel is not taking up racing and nor is their only child Lizzy the Great Dane, I am tidying the car up for sale.  

As far as I can tell it is pretty much ready to go to the dyno for run in and tune, but I'll update in here once I know more.

20250106_114111.jpg

  • Sad 6

So, starting with the rear brakes.

They look like standard R33 GTST, and will need new pads shortly (less than 5mm material, probably only 1 day left). The slotted discs (probably DBA) are near new at 18.01mm and the lines are braided

image.jpeg

Front brakes are G4 8 pot calipers over 330mm discs with braided lines. Everything looks good, pretty sure these are off my old 350.

Pads are brand new and judging from gold colour are Winmax which is what I also run on my race car, Neil and I both sourced brake stuff from Matty at Racebrakes Sydney who really knows his stuff

image.jpeg

Everything has bled up nicely with all new Motul RBF600 fluid, there were 2 loose hard line connections and the calipers were new on the car so I ended up doing it 3 times but it is perfect now

  • Like 1

Clutch hydraulics are also all good, looks like a brand new slave cylinder and everything bled up well.

No idea what the actual clutch is, and I don't intend to pull the box off on the floor to find out, so unless we have trouble on the dyno or at shakedown that will remain a mystery for the new owner

  • Like 2

yeah for sure.....remember to put your tools away at the end of each day kids! 

Actually it has been kinda nice working on the car, lots of memories of good times. I can pretty much hear him telling me off for stuff still.

Next, shocks/springs/swaybars

It has Sydneykid valved Bilsteins with HKS pillow ball hats all round.

image.jpeg

image.jpeg

Springs are Eibach race springs on adjustable height platforms, with helper springs in the rear to stop rattling. These are 250 all around but easy to change for something else if required.

Swaybars are powdercoated blue but would be Selby's/Whiteline solid adjustables, 21mm rear and 24mm front. Bushes and links in good condition

image.jpeg

All in good condition, no sign of leaks/damage etc

Front lower control arm is standard with new ball joints, tension rod looks like JJR spherical. Front upper control arm is standard with adjustable bushes in the outside end

 image.jpeg  

Rear arms are all nismo, surprisingly all the bushes at either end look standard but in good conditionimage.jpeg

Subframe has standard bushes with lock collars

image.jpeg

HICAS has a lock bar with standard ball joints at the hub end

image.jpeg

A few other things to round out the chassis mechanical checks.

Diff is nice and full of new oil, pretty sure it is Castrol VMX (I run the same on Award's recommendation). I didn't pull the cover to check, but I'm 90% sure the diff centre is a nismo mechanical (old school, not the gt pro).

Gearbox is also nice and full of fresh oil, not sure what it is but not redline.

Tailshaft bearing looks OK and a tailshaft loop is in place

image.jpeg

Did a coolant pressure test overnight and it was back at 0 by morning....after some stuffing around I worked out it was the water return fitting at the turbo that was leaking, it all held pressure correctly once that was nipped up.

No brand mark on the radiator but I'd bet it is a 40mm cooling pro, with standard clutch and fan

I do need to remember to change the water out for coolant once the engine is run in but otherwise cooling looks all good.

2 minutes ago, fatz said:

How much ya asking drunkan 

I'll send you a message, but until I know what is OK (and anything that isn't) its kind of hard to work out a fair price. BTW I'm just helping out here, ultimately it is Mel's call what she accepts but I know it will go sooner or later.

Onto intake pressure test. I have a Raceworks (damn brand thieves!) pressure test adapter that lets you apply pressure through a standard tyre valve and comes with a pressure gauge.....I just blocked off the other end immediately before the throttle body.

Applied 30psi....and the turbo intake immediately popped off with a bang. Sorted that but it was still leaking, turns out there is a pinhole leak at the BOV adapter that I'll have to find a local place to TIG up. I'm sure it makes SFA difference with such a small leak but I want it to be right.

Everything else up to the throttle body was good.

Also cleaned and oiled the KNX cone filter, and this is the AFM if anyone can identify it (car runs a PowerFC)

image.jpeg

Quick side trip into the engine externals, alternator and PS were in place including tensioned belts, but the PS was dry (my guess is he had the steering rack reco-ed). Filled it up with Transmax Z but it will need more bleeding once the engine is running no doubt.

BTW I've said before, I don't know what kind of soft animals you have in the city, but out here they breed the rats tough. I bet they were disappointed when they tasted synthetic ATF....

20250107_154713.jpg

Coilpacks are Splitfires with a factory loom in reasonable condition.

image.jpeg

I didn't pull one put I bet the spark plugs are new as its a new engine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...