Jump to content
SAU Community

Recommended Posts

i bought a 99 RSFOURS off a fellow forum member. have not had a good chance to 'get to know' the car, but i'm pretty happy with it so far! think the first step will be getting the emanage in and tuned and work on tuning out the R&R when it hits boost - 3 gear loaded from low revs and i could just see the fuel vapour pouring out behind the car. :P

i bought a 99 RSFOURS off a fellow forum member. have not had a good chance to 'get to know' the car, but i'm pretty happy with it so far! think the first step will be getting the emanage in and tuned and work on tuning out the R&R when it hits boost - 3 gear loaded from low revs and i could just see the fuel vapour pouring out behind the car. :P

Nice, do you have a tuner yet? I can recommend Cihan (Etuner) who has done a great job on mine, or Trent (Status). Both great if you hope for the best tune.

i bought a 99 RSFOURS off a fellow forum member. have not had a good chance to 'get to know' the car, but i'm pretty happy with it so far! think the first step will be getting the emanage in and tuned and work on tuning out the R&R when it hits boost - 3 gear loaded from low revs and i could just see the fuel vapour pouring out behind the car. :P

No to the Emanage, buy Nistune supplied and fitted, save money, get same result, be happy.

don't worry Justin, it has gone to a good home - i'm sure the void will be full of EVO before you know it. The whole drive home my mind was ticking over - can't wait to get stuck into it!

will need to do some research on the whole nistune vs piggyback deal, but i already have the emanage and a FIELD harness with the car - so in terms of convenience it's probably going to stay that way. Tuner wise, i'll probably go with Chasers. Paul tuned the Wolf3D that was in my sklyline and that turned a mess of a car into a half streetable car - plus they're also on my side of town.

will look at getting it tuned again once i get a dump pipe on it, and potentially highflow the stock turbo - needs more powahh!

don't worry Justin, it has gone to a good home - i'm sure the void will be full of EVO before you know it. The whole drive home my mind was ticking over - can't wait to get stuck into it!

will need to do some research on the whole nistune vs piggyback deal, but i already have the emanage and a FIELD harness with the car - so in terms of convenience it's probably going to stay that way. Tuner wise, i'll probably go with Chasers. Paul tuned the Wolf3D that was in my sklyline and that turned a mess of a car into a half streetable car - plus they're also on my side of town.

will look at getting it tuned again once i get a dump pipe on it, and potentially highflow the stock turbo - needs more powahh!

I figured you already had the Emanage, has Paul worked with them? If not sell it and go with his suggestion.

planning on giving the car a full detail this weekend as it's been living outside for a few years i think, starting with a claybar and working through the different lotions and potions.

my only question is, is there any specific care i need to take with the pearl white paint? i've heard that it shouldnt be polished? or is that more in reference to using cutting compounds?

planning on giving the car a full detail this weekend as it's been living outside for a few years i think, starting with a claybar and working through the different lotions and potions.

my only question is, is there any specific care i need to take with the pearl white paint? i've heard that it shouldnt be polished? or is that more in reference to using cutting compounds?

You should be right with the claybar kit, comes up great.

You should be right with the claybar kit, comes up great.

yeh i'm not worried about that. its the restoration steps - i've got pretty much the entire meguiars catalogue of cutting creams at my disposal from ultimate compound, swirl remover, paint cleaner to polish.

i've heard that with some pearl paints, the pearl is mixed through the top layer of clear coat, so by cutting it you can actually cut back the pearl???

yeh i'm not worried about that. its the restoration steps - i've got pretty much the entire meguiars catalogue of cutting creams at my disposal from ultimate compound, swirl remover, paint cleaner to polish.

i've heard that with some pearl paints, the pearl is mixed through the top layer of clear coat, so by cutting it you can actually cut back the pearl???

M35 is in the paint, mine has a clear hardcoat over everything.

pearl paint is actuall matte with a clear coat over the top of it

so just check that its clear coat safe and don't take too much off

i reckon the most abrasive you need would be the swirl remover

New brake pads woo! QFM HPX's. Quite happy with them so far. And the service was insanely good. Ordered them midday and got them next morning. OvErNiGhT pArTs yO! Wonder how much better a1's are

don't worry Justin, it has gone to a good home - i'm sure the void will be full of EVO before you know it. The whole drive home my mind was ticking over - can't wait to get stuck into it!

will need to do some research on the whole nistune vs piggyback deal, but i already have the emanage and a FIELD harness with the car - so in terms of convenience it's probably going to stay that way. Tuner wise, i'll probably go with Chasers. Paul tuned the Wolf3D that was in my sklyline and that turned a mess of a car into a half streetable car - plus they're also on my side of town.

will look at getting it tuned again once i get a dump pipe on it, and potentially highflow the stock turbo - needs more powahh!

Do someone with an auto S1 a favour and sell them the E-manage - they can't really use Nistune. For you Nistune will be neater and better!
New brake pads woo! QFM HPX's. Quite happy with them so far. And the service was insanely good. Ordered them midday and got them next morning. OvErNiGhT pArTs yO! Wonder how much better a1's are

A1RM's will stop you significantly quicker than the HPX's will from experience... I have noticed that the A1RM's are a damn sight dustier though!

if anyone is interested www.pivotracing.com has a sale on a lot of their gear, and with the USD up around 94 cents, it's a good time to buy parts from O/S.

i just got a speed meter and a shift lamp (yeh i know, couldnt help myself). speed meter is to correct the speedo, the 19's have thrown it out - and i figure this is cheaper than a speeding fine!

don't worry Justin, it has gone to a good home - i'm sure the void will be full of EVO before you know it. The whole drive home my mind was ticking over - can't wait to get stuck into it!

will need to do some research on the whole nistune vs piggyback deal, but i already have the emanage and a FIELD harness with the car - so in terms of convenience it's probably going to stay that way. Tuner wise, i'll probably go with Chasers. Paul tuned the Wolf3D that was in my sklyline and that turned a mess of a car into a half streetable car - plus they're also on my side of town.

will look at getting it tuned again once i get a dump pipe on it, and potentially highflow the stock turbo - needs more powahh!

Make sure you post pics of what you do to it. On the Nistune I have heard they are good also, They were still only new when I got the emanage fitted but if I had my time over I would seriously consider one. Trent at Status does them, also he does a bit of work with the Hypergear turbos so you might consider looking him up if you want a highflow. The hypergear stuff is good value and I have heard heaps of people on here claim good results from them.

got some different wheels :happy:

downgrading to 17's but they are wider and clear the r34 brakes without spacers (win)

and also 8"+35 instead of 7.5"+42

will post some pics when i clean them, they look ok but i'll get something better soon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
    • Hi everyone, I've been wrestling with this for a while now and have been trying to find out the cause. For context, the turbos used are Garrett 2860 -5s, the BOV is a BNR32 HKS SSQV IV kit, the car is currently tuned to ~470 whp on 17.5 psi. The car drives normally, pulls well when it doesn't happen, and I can replicate it fairly easily. It does not sound like turbo shuffle or flutter. The engine has only a thousand or so miles and has had this behavior since it was completed. After my engine was built for my R32 GTR, I noticed that the car now sometimes makes an air discharge sound on what appears to be positive boost pressure that sounds really similar to a BOV. I had thought that it was a BOV issue but even when replacing it with a brand new unit, the sound persisted. It seems like it's coming from the passenger side but I may be mistaken. The closest scenario I could find was this post here https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/ started by @yakshii and it sounds very similar. As in, at partial throttle once I reach positive boost I begin to hear the same psh psh psh psh psh sound like air is leaking somewhere when I keep the throttle in the same position. It most commonly happens in 4th gear at around 3-3.5k RPM and 5th gear around 2.5-3k RPM, which seems to coincide with normal positive boost thresholds. It might be similar to what @Austrian GTR mentioned about his own HKS SSQV. Notable difference would be that when he applies more throttle when it happens, it stops. In my scenario if I apply more throttle during this repeated psh psh psh sound, the cadence of the sound gets faster and louder rather than stopping. If I lift off slightly and apply throttle again, it will normally stop and pull without issue. I've checked all rubber couplers to ensure that they are tight, but have not gotten the opportunity to properly do a pressurized boost leak test. If anyone has had similar experiences or thoughts on what might be the cause, I'd be very keen to hear them. I also have a video of it happening from inside the cabin, if that would make it easier to understand: https://youtu.be/2zqZXcx8jbA
    • I'd want at least $40K for mine, but thats easy to say cos I'm not selling anyway.
×
×
  • Create New...