Jump to content
SAU Community

Recommended Posts

Just saw this on the net - Guess higher kms bring the price below the market value.

If someone is after a black one, here you go, looks nice and clean, and stock.

Black 09 ADM for 109K

Edited by rehab2010
  • Nope 1
Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/
Share on other sites

price dropped already to 105k only after 1 ( or maybe 2 ) days on carsales !!!!!

The gtr seems to depreciate quite rapidly . Redbook values 09 premium gtrs (for trade in) around the 106k mark for one that has done 20000km . So with this car having 44000kms the price seems to be right in terms of what the dealer would offer him.

I wonder what they would be worth towards the end of next year ?

Edited by msuen
Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5537854
Share on other sites

it would have to be a long distance commuter car. in 12 months that's over 3,500 kms a week, which is over 500kms a day 7 days a week! or over 700kms a day 5 days a week. that would be impossible to do in just short 5km-10km trips unless the bloke was a courier... lol.

Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5537908
Share on other sites

price dropped already to 105k only after 1 ( or maybe 2 ) days on carsales !!!!!

The gtr seems to depreciate quite rapidly . Redbook values 09 premium gtrs (for trade in) around the 106k mark for one that has done 20000km . So with this car having 44000kms the price seems to be right in terms of what the dealer would offer him.

I wonder what they would be worth towards the end of next year ?

your calculations are way off dealer is most likely offering him 88-94k i'd think redbook is no where near accurate usually take money off the LOW end even for a good condition car and tahts what a dealer would give you they are theives! haha

LOL @ courier who awesome would that be

Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5537909
Share on other sites

it would have to be a long distance commuter car. in 12 months that's over 3,500 kms a week, which is over 500kms a day 7 days a week! or over 700kms a day 5 days a week. that would be impossible to do in just short 5km-10km trips unless the bloke was a courier... lol.

could be an ex P1 or Supercar Club car.

Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5537944
Share on other sites

certainly a daily driver there...wish to say that's not half price really, since you can pick one up new for $150k plus on roads (hey you still gotta pay rego/stamp duty for this one esp if you take it from interstate) so really it's a 33% depreciation or thereabouts.

a lot of car for not much money :blink:

Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5537945
Share on other sites

could be an ex P1 or Supercar Club car.

I doubt its from the Supercar Club, they only offered a limited number of km's per year on each type of membership so I doubt it would of racked up 44k in 12 months.On a slightly different not does anyone have 105k I could borrow interest free for say the next 20 years :P

Edited by FrangaR33
Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5538142
Share on other sites

The price is reasonable for somebody who wants to sell quickly, all the GT-Rs on carsales are priced too high.

The only movement I have seen lately was an SA registered 09 which was advertised at $126k and had gone through a few price drops.

44,000kms with some wear showing on the seat side bolsters? Certainly sounds genuine and could be a great buy!

Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5538332
Share on other sites

44,000km, pfft. I'd buy it if I was in the market for a GTR. I'm sure these cars (bar the transmission :P) are made to last 200,000km+

Gotta get it out ya heads that these things are F1 cars in need of engine rebuilds every race (or two) :ermm:

Time and how it is used are more important than the km it has done IMO, thrashed taxis do 600,000km on a single engine because the thing never stops running.

it would have to be a long distance commuter car. in 12 months that's over 3,500 kms a week, which is over 500kms a day 7 days a week! or over 700kms a day 5 days a week. that would be impossible to do in just short 5km-10km trips unless the bloke was a courier... lol.

That would be one super fast courier :P

I wish mine was that quick at delivering parcels :D

Link to comment
https://www.sau.com.au/forums/topic/343416-adm-for-109k/#findComment-5538432
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...