Jump to content
SAU Community

Aussie Delivered R32 Gtr's


Recommended Posts

BTW Kasey reduce the average sale prices by 10-15k for the blown motor and you'll be about right. Not sure who came to the conclusion that head work is required, it is almost certainly a bottom end rebuild that is required including new bearings and probably boring out the cylinders to remove the scores (which will also require aftermarket oversize pistons). Not a big deal, but not minor either...been there, done that before

Where is the car, I've been keeping an eye out for something that has original bits but needs some work.

Also, this forum is probably the best place to sell it to a genuine buyer that understands why it is worth more than imported GTRs.

Hi Duncan,

I think my stepfather did get a quote to have the work done, the details are sketchy it was a number of years ago and it is tough to get an understanding at this point. The car is in Castle Hill, Sydney. I am actually in NZ but my brother is in Sydney and could show you the car if you wanted to have a look. I have always been told that he brought the car new, he is quite pedantic so i would assume everything would be as original as practically possible. I know the stereo stopped working a few years ago and someone nicked the GTR badge off the boot but should be in good condition otherwise. Although it really has been forgotten about for the last few years, as they have had bigger priorities to deal with. We were trying to weigh up whether to fix it and get it back on the road or not before selling but again we have other priorities

Let me know if you want to have a nosey at it, [email protected]

Link to comment
Share on other sites

Hi Kasey,

I too live in Castle Hill (Cherrybrook/Dural side) and as an owner of 2 ADM's and one V-Spec 2, I would be only too happy to inspect the car and give you a fair evaluation as to its worth.

I'd love to see Duncan buy the car so rest assured I have no intention of cutting his grass! :worship: :worship: :worship:

I'll send you an email containing my contact details.

Regards,

Bob.

Link to comment
Share on other sites

  • 2 weeks later...

someone posted on the sau fb page that the tail lights were quoted at $1100 so looks like its getting parted for good money for the wrecker.

also someone calling them R34 style lights...... sigh

Link to comment
Share on other sites

OK......... Just to clarify,

The owner bought 2 ADMs within 5 days of each other.

The one in the picture is a stolen/recovered, not the car mentioned on here in post 1125.

The tail lights are from a silver car he bought late last year.

To the best of my knowledge, neither car will be wrecked, certainly not the Castle Hill car.

A few pics I took when I inspected the car.

Cheers,

Bob.

post-78207-0-97245500-1422946451_thumb.jpg

post-78207-0-90853100-1422946452_thumb.jpg

post-78207-0-79415200-1422946453_thumb.jpg

post-78207-0-41489200-1422946454_thumb.jpg

post-78207-0-25839300-1422946455_thumb.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This morning I carefully reinstalled the manifold and started looking at a couple of things I need to do.  Heat wrap arrived sometime today so I popped into the shed with the missus dishwashing gloves and started wrapping the first half of the dump and the screamer/plumb back.  Once I do the second half I'll be able to final fit the turbo and exhaust up.  Also pulled the harness out today and started terminating it at the ECU end. A connector is done, just need to run the remaining wires that arent in the harness - 12v, gnd and couple I/O
    • A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
    • 215/45/18 tyres are probably a little on the low side compared to the factory tyre, it should be closer to a 245/45/19, which will get you about an extra 11mm of height, and should make you speedo read a bit closer to reality. 245/45/19s will be a bit too far the other way and you risk a speeding ticket as your speedo might read slower than your actual speed.  245/40/19s would be correct if you are going to 19in rims, they will give you a similar total diameter to the 245/45/18 tyres.  
    • That's something I forgot to put in my list. The aggressive anti-squat in R32 is a f**king menace. I still need to decide if I'm going to drag the subframe out of my car and weld in the GKTech corrector kit. The main reason to dither is the need to switch to spherical joints in the lower arm to account for the twist induced in the rear pivot caused by lowering the front pivot. And yes...we do put better subframes in R32s, and I wish I'd gotten an S14 one instead of an A31 when I did the "take off and nuke it from orbit" HICAS delete all those years ago.
×
×
  • Create New...