Jump to content
SAU Community

Recommended Posts

Well. I'm even tempting saying stuff it n go straight to Trent.

Give them the benefit of the doubt, its not going to cost you anything.

TBH it caught me out 1st time i did a LINK, With the LINK unless you do a store after each tuning stage it will loose all your "current" changes and revert to the "original" map that it was started on (not the original base but the same map the car was key started on). They could have accidently lost the last lot of map changes.

Give them the benefit of the doubt, its not going to cost you anything.

TBH it caught me out 1st time i did a LINK, With the LINK unless you do a store after each tuning stage it will loose all your "current" changes and revert to the "original" map that it was started on (not the original base but the same map the car was key started on). They could have accidently lost the last lot of map changes.

I rang lunch time.asked for a a/f chart by the end of the day. Didn't happen.

Give them the benefit of the doubt, its not going to cost you anything.

TBH it caught me out 1st time i did a LINK, With the LINK unless you do a store after each tuning stage it will loose all your "current" changes and revert to the "original" map that it was started on (not the original base but the same map the car was key started on). They could have accidently lost the last lot of map changes.

Plus this is no way near their first link.

The question is... How disapointed will you be if you pay Trent to fix the said issues and you find it is hardly any better?

While I dont doubt his knowledge and opinion, I also know you should never expect too much. I have a feeling the amendments will make for an all round better car but would only hope that a good improvement in response is found, rather than expecting one..

As stated AVO should be willing to tacklw this for you free of charge.

Ye but to be fair - he's been told its got nothing to do with the actuator.

Whilst it really only IS going to be the actuator, 2nd opinion also backed that up what a lot of us suspected anyway. We've all seen enough results to have a "reasonable" idea of where things should sit.

There are also further reccommendations in other area's as well.

I mean go back and see, but i cannot see them being too forthcoming on it all and more time spent might not achieve anything.

I also highly doubt they will do it for free, no one works for free, hell even when they have stuffed up a lot of places still charge.

I'm gonna ask to refund my money on the tune. They seem too busy for me.

let us know how you go with fitment on a 6boost manifold. i have the same housing but to suit a gt30 on a hks cast manifold and fitment is mission impossible in every regard. for example the edge of the t4 flange sits so close to the comp housing that i've had to leave one of the comp housing bolts out as it fouls. have fun with the lines....:thumbsup:

ill trial fit the turbo an make some lines up on the weekend and let you know how i go,

with the rear housing only bolted on the manifold it sits atleast 10mm lower then the HKS one i had

yeah its a RB30, 26 head forgot to mention that - thought we were in the RB30 section :P

im will be talking to a few tuners im in sydney so it will be out of JEM/Powertune/unigroup still probly 4-5months off from any dyno time

quick question guys would a 3 1/2 inch dump to 4inch cat back be over kill for my set up? OR should i just stick to 3 1/2 inch the whole way?

for your thing 4inch is the go. yes turbine outlet is small but you want a nice taper out from the outlet to 4inch pipe. even more important if you are planning to plumb in the wastegate outlet.

http://www.skylinesa...5890781__st__20

almost 1000rpm of spool difference, although completely different dyno setups so not really that compareable. Still it really does look like his is set up perfectly.

He is also using external gate and manifold, what are you using?

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...