Jump to content
SAU Community

Recommended Posts

How would a GTX3076 go with a 0.63 rear housing ( external) assuming it had either water/meth or E85??

assuming it had 22psi, would it be a fail or quite good?

Edited by SliverS2

How would a GTX3076 go with a 0.63 rear housing ( external) assuming it had either water/meth or E85??

assuming it had 22psi, would it be a fail or quite good?

You have the perfect housing, don't change it to the .63 or you will have more issues with det than you have now.

I doubt your engine is that coated in carbon that the compression would have been bumped, Can you get a scope down there for a look? If it is just drop the head off and clean it up, if its not there are some serious issues with your setup Mark.

You have the perfect housing, don't change it to the .63 or you will have more issues with det than you have now.

I doubt your engine is that coated in carbon that the compression would have been bumped, Can you get a scope down there for a look? If it is just drop the head off and clean it up, if its not there are some serious issues with your setup Mark.

Im starting to think its to do with the tuner, he didnt take very long, most of it was done within an hour, on the graph its only holding 16psi and you'd think he would of said, "mate, there only mild cams, you got some issues with leaks somwhere", it even stalled on him on the drive home, i think fix up this leak and possibly change the wastgate spring for a 1bar spring and even replace the resonator and then retune with E85.

How would a GTX3076 go with a 0.63 rear housing ( external) assuming it had either water/meth or E85??

assuming it had 22psi, would it be a fail or quite good?

My standard GT series made good power at only 21psi with .82 rear and full boost is 3800 or something.... So no need for smaller rear I don't think...

how long would it take to clean the motor if your running ethanol? or would that matter if your running ethanol?

Mine had a little carbon on the pistons, a quick squirt of gasket stripper cleaned them right up. Its a 150,000k engine so it should have been fairly caked.

The ethanol wont ever ping with a good tune and it's cheaper to run than 98 now the price dropped. (United) Shame the only outlet in Qld is Warwick, how close are you?

How well did it hold boost in the high rpm?

Did it drop off towards redline?

It used to drop off too 18psi by red line, tuner said if we could hold boost up top it would crack well into the 400's..

Mine had a little carbon on the pistons, a quick squirt of gasket stripper cleaned them right up. Its a 150,000k engine so it should have been fairly caked.

The ethanol wont ever ping with a good tune and it's cheaper to run than 98 now the price dropped. (United) Shame the only outlet in Qld is Warwick, how close are you?

Warwick? im pretty sure theres some close by , well 40mins away at kessels rd mt gravatt which is on the way to the city anyway. :yes:

That would be from the pump, so is it right in saying the tuner will tune it not on the egde to account for if the ethanol content varies?

United is at Warwick.

Ethanol variation isn't a problem, even 10% variation would hardly change the afr's. I guess I have no worries with it as I bought a wideband, perhaps you should lash out $200 on a gauge too if you decide to go with e85?

Every tune is rich on boost, how much so depends on what your tuner is comfortable with. The Jap tuners love 10:1 on petrol with shitloads of timing, here around 12:1 and a less aggressive timing map is the norm. Either of these tunes should have enough overhead for a fair amount of variation and it should never ping anyway. Just make sure your tuner has e85 experience (although most would by now.)

I'm running 19-20:1 on cruise at the moment with no adverse effects, no knock and good exhaust temps. Try that with petrol, it wont run well and you would f*ck your engine fairly quickly I assume.

Mine had a little carbon on the pistons, a quick squirt of gasket stripper cleaned them right up. Its a 150,000k engine so it should have been fairly caked.

The ethanol wont ever ping with a good tune and it's cheaper to run than 98 now the price dropped. (United) Shame the only outlet in Qld is Warwick, how close are you?

You need to get out more.

Caltex goodna

caltex springfield

caltex yamanto

Caltex goldcoast (suburb escapes me)

Caltex upper m Gravatt

All carry Eflex. I fill up at the yamanto outlet regularly and have used most of the others.

Plans are underway for a major increase in outlets, A new plant is being built in north qld right now.

Once completed you will see a major increase in the number of outlets.

any word if this major increase will stretch to NSW?

Nation wide from what I can glean.

The plant is definitely under construction as we speak. A friend has a supply contract for parts for the new truck fleet delivering cane to the plant when it opens.

That is freaking unreal. More or less the only issue I have with moving to ethanol is its availability.

If its more readily available in my area and on the way to wakefield I would happily retune my shitbox to run it.

Anyway, GTX bla bla bla.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...