Jump to content
SAU Community

Recommended Posts

Stripey horse, seeing as you are going to need a custom manifold anyway.. Why dont you get something like the GTPumps 20g SL2 and get a 6boob with no gate attachment and an evo flange?

Response on that would be balistic and you should net the higher region of 2xxrwkw

A link:

http://cgi.ebay.com....=item3f0595cb7e

I have driven these on evos.. They are scary. I dare say a J-pipe would suffice and would be CHEAP too.

Like this:

http://cgi.ebay.com....=item1c17f04f9e

It would obviously not need a gate.. Can be low mounted.. And can be made a lot cheaper than his price. Keep in mind stock manifolds can support over 300rwkw.

2nd = 1bar at 4300 (very hard to judge because it start's frying tyres)

3rd = 1bar at 3800

4th = 1bar at 3500

5th = 1bar at 3300

Thats impressive! I actually think thats about the same as what I get - got any vids?

I am sure mine would be a bit better with better manifolds etc, but still for a cheap turbo that can flow that well... hat off.

What I don't get is why so laggy on the dyno plot? Surely the dyno run doesn't last as long as you get through 2nd get with that good spooling? If I stand on the throttle at 3000rpm in 2nd I don't get a lot of time...

Thats impressive! I actually think thats about the same as what I get - got any vids?

I am sure mine would be a bit better with better manifolds etc, but still for a cheap turbo that can flow that well... hat off.

What I don't get is why so laggy on the dyno plot? Surely the dyno run doesn't last as long as you get through 2nd get with that good spooling? If I stand on the throttle at 3000rpm in 2nd I don't get a lot of time...

No vids yet, might go for a drive today and see what I can get :)

nice video man

really pulls hard from 120-220 lol

Under a grand, get one and pop it on your car lol

Weve seen you go thru the paces trying to find a turbo you like (back to a 35R I see)

haha yeah mate

running the gt3582r with .82 at the moment only on 19psi

but i think my car has some other issues... only just fixed one big one which was inlet manifold leaking coolant into the cyclinders and causing it 2 run like shit haha..amazing what $90 worth of machining can do and a $80 genuine gasket

new ecu and hi mount exhaust manifold are on the books for decent power

Video looks really good, too much glare on the gauges (maybe the crap monitor I was using) made it hard to make out, looked a bit like you were backing off just before 1bar but it puts across enough to make it clear it builds boost solidly and goes like the clappers.

Very very nice - best cheap turbo I've seen in action so far, potentially one of the better options out there fullstop really. Whats the rest of your setup?

Video looks really good, too much glare on the gauges (maybe the crap monitor I was using) made it hard to make out, looked a bit like you were backing off just before 1bar but it puts across enough to make it clear it builds boost solidly and goes like the clappers.

Very very nice - best cheap turbo I've seen in action so far, potentially one of the better options out there fullstop really. Whats the rest of your setup?

Yeah my shitty camera and recording skills are fail :(

All the pulls from 3000rpm went over 1bar except the first one which went 0.92 (I know this because there is a peak on the Greddy Profec B Spec II)

Check out build thread in signature, I think it's got most my setup

Edited by SimonR32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...