Jump to content
SAU Community

Recommended Posts

Yes, it will last 10,000kms for sure

5000km changes? Bullshit.

10,000km with a Group V oil is no problem... unless you are tracking it.

yes well from the troubles i been having lately, im not being a penny pincher and am doing it every 5000km.

i agree with 10k services. 5000km is overkill for a street driven car

really?

why are all the performance shops saying every 5-7000kms a service should be done especially being a turbo charged vehicle?

fact that im going for a tune on wednesday change anything? or ...

because people pay over $200 per oil change at a performance shop.

do an oil change before the tune

no but this is a performance shop knowing that I'dd do it myself..

yeh theres no oil in the car.. once the turbo goes on im doing a flush, then putting some new oil in, then driving that up to get some Sougi 6000 or whatever it is.. n changing it the night before :) sounds right?

no but this is a performance shop knowing that I'dd do it myself..

yeh theres no oil in the car.. once the turbo goes on im doing a flush, then putting some new oil in, then driving that up to get some Sougi 6000 or whatever it is.. n changing it the night before :) sounds right?

AFAIK Sougi 6000 is gone...well Birds doesn't sell em anymore. Are u leeching off Scotty's stash? :teehee:

If Chrono 300V is 120 per change then I might as well do that...considering I'm paying $80 for Mobil 1 which needs to be changed every 5k...

because people pay over $200 per oil change at a performance shop.

do an oil change before the tune

And the fact that most performance workshops use a generic oil.

At best you can expect Mobil 1 (which certainly isn't bad, but it is no Group V oil)

And the fact that most performance workshops use a generic oil.

At best you can expect Mobil 1 (which certainly isn't bad, but it is no Group V oil)

so im guessing theyd be under the impression im using mobil or equivelent?

makes sense now. would it make a difference for when/after i tune? or is it dependant on how heavy my foot is...

its because workshops live on services, its their bread and butter. no offence intended to any workshop, but if you convince people they need a service every 5000km, they probably will

when JDM S15s came on the market, the dealers (import dealers) were saying they need 5000km services because they are imports. tell me why the same car was sold locally and needed 10000km oil changes?

its because workshops live on services, its their bread and butter. no offence intended to any workshop, but if you convince people they need a service every 5000km, they probably will

when JDM S15s came on the market, the dealers (import dealers) were saying they need 5000km services because they are imports. tell me why the same car was sold locally and needed 10000km oil changes?

wasnt this a completely different tune to the ones that were sold here?

but whats your saying does make sense.. but will my circumstance change after the tune??

no but its good to have fresh oil in there when they rev the shit out of your car for a few hours :)

however, if you have to change plugs, do it after the tune as they will probably be fouled and you dont want to do that to a fresh set of plugs

no but its good to have fresh oil in there when they rev the shit out of your car for a few hours :)

however, if you have to change plugs, do it after the tune as they will probably be fouled and you dont want to do that to a fresh set of plugs

lol too late i've already changed then about 50km before the turbo died.. so they're new.. Cihan advised to change em prior :blink:

yeh i know aboout the revving... not sure if i wanna witness this lol

lol too late i've already changed then about 50km before the turbo died.. so they're new.. Cihan advised to change em prior :blink:

Same here. He mentioned its so he doesn't have to hunt down a fouled plug during the tuning process...

Same here. He mentioned its so he doesn't have to hunt down a fouled plug during the tuning process...

yeh. although my plugs in the car were pretty new, they were changed on complianced which im told is rare..

good!

i guess he needs a driveline upgrade soon lol

yeh so i heard, which is why mines getting a shift kit installed on monday.

exact words from the RVO guy. "i'm going to up the line pressure as much as possible without breaking shit"

hahahaha.. good enough for me..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...