Jump to content
SAU Community

Recommended Posts

I have a few but none fit down (or up) there properly. I can do it in a minute or two now with my cut down 22mm open end spanner though.

I fitted Whiteline diff bushes in my car today, quite cheap to buy too. It made one hell of a difference too, all the axle tramp is gone and it chirps nicely between gears again, it really tightened the whole back end. My original rear diff bush was totally flogged and was leaking oil.

well on the bright side it will be a good test of banjo sizing.

symptom 1 of too much oil to the turbo will be burning oil at full boost (grey/white smoke)

symptom 2 of too much oil to the turbo is the turbo seal blowing.

If neither of those happen, it's not too large :)

  • Like 1

The stock Garrett core will have a restrictor built in so it shouldn't pose too much risk, that said the VQ runs stupidly high oil pressure, I have seen 10 bar on my gauge which I think is it's limit...

The stock Garrett core will have a restrictor built in so it shouldn't pose too much risk, that said the VQ runs stupidly high oil pressure, I have seen 10 bar on my gauge which I think is it's limit...

I wonder if that had something to do with my issue? Stao told me to drill mine to 4mm.

I wonder if that had something to do with my issue? Stao told me to drill mine to 4mm.

That seems very large. I did mine with 3mm (think that is what is was, was more like find drill bit to drill after 10 hours under the car changing turbo).

I agree with scott, 2.5mm max.

That seems very large. I did mine with 3mm (think that is what is was, was more like find drill bit to drill after 10 hours under the car changing turbo).

I agree with scott, 2.5mm max.

John from Precision recommended I drill mine to 4mm; so I did. No issues with mine.

Oh joy. Replaced another AFM.

FML.

I popped my new genuine Nissan one after about a month; failed just as the car started.

I bought a WRX one the 2nd time. It seems to be going fine.

It fits about 4 billion different models, so at least they're easy to get.

I popped my new genuine Nissan one after about a month; failed just as the car started.

I bought a WRX one the 2nd time. It seems to be going fine.

It fits about 4 billion different models, so at least they're easy to get.

What number are you on now? I think I've killed 3 now.

Did you buy new last time, should be under warranty surely.

This is the 2nd one thats died in 4 months.

Got a 2nd hand one last time from a wreckers which they gave me 3 months warranty on - failed after 4 months to the day. lol

Today Craig and I, well lets be honest mostly just Craig fitted the plenum spacer, scotty's coolant mod, transgo shift kit and finally got around to doing the fun switch mod.

Improvements?

Shifting is definitely faster and I actually think smoother. I havent driven it alot yet but we stalled it up and even with the fun switch off the boost is coming on much stronger. Will see how it goes after I drive it a bit. Still have a random stalling issue but hopefully will get that sorted soon. The car is getting there :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...