Jump to content
SAU Community

Recommended Posts

wait till you decide to take the starter motor out.......if it's anything like the BNR32 its a BITTTTCCCCCHHH!

surprising, when removing my gearbox i didn't have any problems with it, my mates r33 doesn't have one of the bolt in cause he had problems, I managed to get it off and on with no problems maybe 5 - 10 mins each way

flathead screwdriver smashed through the filter with a hammer. WIN

there is seriously not enough room to even try that, I had a cut down screw driver i Just couldnt get in

this is all you should need

1x 10mm socket

1x extension

1x rachet

1x oil filter socket

scottsstagea010_zps50289353.jpg

I should have put one of the K and N filters with the nut on the end!

Also couldn't do my diff oil, seems at night I didn't check which out of the 3 containers all 2.5 litres i picked up, I put the diff oil in the gearbox! hence why it was so smooth, gears change are beautiful, and car took a complete flogging from the weekend when I competed in the 2013 REJEX Rally which was great, down side is I need 4 new tyres :(

What about plasti-dip?

Finally finished off my trip strips

d3b0f40c-41e2-461b-88c0-28d61af95c96_zps

And fixed my boost gauge with teflon tape (no pics tho)

Might also fix the split cv boots soon, and give it a service with synx-6000 :D

Did the same thing to my body mould chrome strips a couple of months back, my car is white with black rims also.

The faux chrome in my body moulds has been patchy and rough since I bought the car.

I bodge jobbed the black out though, I have used insulation tape trimmed to fit as I wasnt sure if I would like it and wanted an easy undo.

Once the first bit of tape peels back at an edge I'll look into this plasti dip bandwagon.

Just resprayed my grille black again this week as stone chips were making the chrome poke back out...

Only chrome left now is the tail light in-fills but I think they can stay.

Ill get some photos when I get it out tomorrow.

Well im now the proud owner of an RS4 factory manual and very happy.

time to start the big clean up before i get down to making it how i like it.

better look after is as it has a confirmed 74000km on the clock and almost no mods appart from a dump back exhaust and cheap mags.

IMAG1590_zps1c7017ff.jpg

front needs some love, fading lights with condensation annoys the absolute hell out of me, almost as much as having a dirty windscreen.

got the elbow grease out and threw in some 6000k philips xennons. gonna start replacing everything with LEDs as per usual. love the led look.

still undecided as for what to do with the yellow foggies.....more pondering needed.

IMAG1597_zps7b20887a.jpg

so much better looking when they're actually clear.

IMAG1612_zps703355b1.jpg

IMAG1614_zpsfbfa782d.jpg

the wheels will go but the height is the propper issue. needs coilovers stat

IMAG1623_20130806001152033_zps46bef164.j

the 34 is getting jealous

IMAG1592_20130803205827287_zps974c2b5d.j

the interior needs a damn good clean, got a good upholstery cleaner and tackeled the passenger seat, it is a real shame that people dont keep ontop of this shit. oh well. more elbow grease has been employed.

shitty

IMAG1629_zps7f6c960d.jpg

cleaner

IMAG1631_zpsdf9411d9.jpg

IMAG1632_zpsa5b8cd12.jpg

comparing the clean passenger to the shitty drivers!

IMAG1634_zps68c85286.jpg

random as f**k sticker

IMAG1658_zps9fc32325.jpg

i think cars drive better when they're clean?

IMAG1664_zpsa392a80f.jpg

ok that was my weekend, gotta do soo much more.

thanks for listening

  • Like 2

I feel your pain about the interior my 260rs was a kiddy car and had s#*t all through the back seat when I got it,gave it a good steem clean now looks new again. Wow good job on the head lights that's a huge diffrence! And last but not least nice ride

I finally figured out how to remove the cargo blind. Ph34r my detective skills.

Yes, I also found out where to store it under the boot floor. This car is brilliant.

I started installing my front mount yesterday. didnt have to cut the reo to much so im happy about that. its an r33 turn flow and nearly bolted straight up so was pretty easy

20130811_2056381_zps9dcb8d39.jpg

first spin i took it for i forgot to tighten one of the pipes so car kept stalling and limped it back home, works all good now just have to cut the front bar and splash trays to fit.

also looks like it has hit a tow ball or something. :O

Edited by Dobo

 

the interior needs a damn good clean, got a good upholstery cleaner and tackeled the passenger seat, it is a real shame that people dont keep ontop of this shit. oh well. more elbow grease has been employed.

 

comparing the clean passenger to the shitty drivers!

 

Posted Image

 

 

My car has a similar problem (seats look like your driver side). Interested in what cleaner you used?

I've some cheaper generic fabric cleaners i've used for my couch by seem painful to work in and clean...

Hire a steam cleaner from woolworths.

Have done this every time I have bought a new (used) car. It will blow your mind how much dirt comes out of even a 3 year old car.

Eg. This was from a the seats of a 2009 model car. attachicon.gifImageUploadedByTapatalk1376287937.297508.jpg

Hire a steam cleaner from woolworths. Have done this every time I have bought a new (used) car. It will blow your mind how much dirt comes out of even a 3 year old car.

+1 I even use the same Steam cleaner haha

Fitted a jjr front mount kit to the c34. Ended up cutting the end of tr rails rather then then reo. Really didn't want to do it but hey... Also had to remove the ac can as its massive! If I have problems I will get a slim fan to replace it.

Then fitted a stainless jj bell mouth dump pipe along with a high flow cat. Much less drone with the cat (gutted one before)

Next up is a muffler and 3inch for the test of the system to some twin pipes. Then nistune!

Agreed on woolworths cleaners. Did the same for my stag and the wife's 100. You also find many things under the carpet like $20 and a bottle of vodka haha

What would happen if I was to remove the dvd navi permanently from the circuit. Eg thinking of relocating headunit here.

and hand would pop out from behind the dash and bi*ch slap you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...