Jump to content
SAU Community

Recommended Posts

Installled new head unit. Working well and much better sound.

What connector is that? it was connected in the old head unit

If that head unit is like mine should have wires in the loom labelled key1 / key 2. Tap into that connector red to key 1, green to key 2 and yellow to ground.

Speaking of which, in what was perfect timing my factory Bose unit died (at least the AC was stuck at 18°) . It'd been playing up for a few months, not playing nicely with the Grom USB2+. Luckily I'd already gathered the required replacement parts and had them sitting there ready. Cheap Chinese Android head unit with a PAC ROEM-NIS2 interface unit (because i'm lazy)

post-128502-0-05747300-1453781413_thumb.jpg

bolt on Dolphin intake pipe from JP

:rolleyes::rolleyes:

attachicon.gifIMG_1680.JPG

attachicon.gifIMG_1686.JPG

attachicon.gifIMG_1688.JPG

attachicon.gifIMG_1687.JPG

It's a shame that it doesn't fix the actual part of the intake that causes all the restriction.

Yes steering wheel control plug . Previous owner of my stag had it all working to a degree i replaced headunit and have since lost all controls

whether it is possible that the connector is somewhere else

Because I dont have buttons on steering wheel ;)

whether it is possible that the connector is somewhere else

Because I dont have buttons on steering wheel ;)

From memory the plug has about 6-7 cables running to it from the loom only 3 operate the steering wheel controls or are needed ? I could be wrong in saying this but most cars from base model to top of range have same looms and plugs in place it just a matter of weather they utilise them for that model

It's a shame that it doesn't fix the actual part of the intake that causes all the restriction.

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

Having a huge chunk of air sitting there ready to go will help improve response/spool.
  • Like 1

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

Good lucking pushing over 200kw without swapping the lower intake pipe. Where with an after market one you can push over 300 so I think it is rather restrictive

  • Like 1

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

You obviously haven't removed the suction pipe yet...

  • Like 3

Good lucking pushing over 200kw without swapping the lower intake pipe. Where with an after market one you can push over 300 so I think it is rather restrictive

Context is more along the lines of having a daily driven than chasing powaaah. Velocity stack on end of turbo ftw then.

Ps found the link to the 2009 post and no. Haven't removed that part yet.

http://www.sau.com.au/forums/topic/296472-fisher-mk2-suction-pipe/

Edited by Reaperblitz

So as some of you know last Thursday my car was stolen from my driveway, it was found on Friday morning crashed into a tree. I’m pretty gutted as I have put a lot of work into it. Here are some photos of the damage caused

Glass on my driveway
59cEpf.jpg

Rear Quarter Damage
ouoc88.jpg

Tailgate Damage
iOIDkZ.jpg

Broken Windows
V7bo65.jpg

Panel Damage
mBWNS7.jpg

Broken Window
h2d5w4.jpg

c1JUMD.jpg

Cracked Windscreen
spVQD7.jpg

How they hotwired it
2khRFM.jpg

The same day that I came from the salvage yard, this was waiting for me at my desk. It’s the grill that I ordered from Japan in November
krqAnY.jpg

That is fkn terrible. Arseholes.

Nobody saw anything?

Presume it is a write off?

I asked neighbours, and my street there is normally someone outside, nobody saw anything.

It is getting assessed by the insurance company today, but i dare say it will be a write off

Edited by DrLui

I grieve for you.. buy it back and sell off the parts or put towards another stag?

If the insurance co operate, i do plan on buying it back, keeping what i want, selling what i dont, then buying another and starting again

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...