Jump to content
SAU Community

Recommended Posts

Thanks Adam, I figured the 20% additional flow should be able to cope at this stage. Seems like I was right, I just saw Nismoid mention minimum 700cc in another thread and started to wonder... :thanks:

500-550cc injectors will not allow -5s to perform to their full potential power wise as they will not slow enough.

700 are needed at a min, which is the next "size" up in the jap brands IIRC as there is a gap between 550 and 700 where nothing fits

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Just as my stockies would top out at 305rwkW these will top out at 360rwkW... My bottom end will be annoyed prior to this though.

Cam gears and 100k service bits to buy, then I'll book it in. Might leave it a month or so and revive this thread as I have a bill coming up on another car this month...

im with you GT-R32 everyone always burns -5s if the word "response" is in the thread. Im about to upgrade to -5s on my 26, ive got old school Nismo steel wheels on my car now, it makes 311kw and they are maxxed, it makes more boost on a cold night lol but if its warm im lucky to make the 18.5psi its tuned for, even in 4th gear with a full pull. comparing my dyno sheets to the cars with -5s, my car will be the same if not less laggyer with the -5s bolted up. The power line will just keep climbing instead of flating out : D

True that,

Got R33 N1's on my now old dinosaur things making 330kw, looking forward to better response plus lots more power ;)

500-550cc injectors will not allow -5s to perform to their full potential power wise as they will not slow enough.

700 are needed at a min, which is the next "size" up in the jap brands IIRC as there is a gap between 550 and 700 where nothing fits

Nismo 600 purple tops? Prob still not big enough though.

I have a built forged engine running standard cams with Tomei cam gears, standard head, air box and running -5s at around 20 psi on a safe tune.

The exhaust is 3.5" with a matrix 3.5" cat, this reduces down to a 3" exhaust about 600mm past the cat which includes two 3" elbows and a 3"muffler.

The cars at the workshop now and they are changing it to a full 3.5" system with a dyno run for minor adjustments to suit, its currently pulling 338Kws, this is a genuine back to back dyno run with an exhaust upgrade so it will be interesting to see what and if there is any differance in the power levels running the same psi and safe tune, results next week, Cheers.

To all the exhaust buffs.

Just picked the car up now with a full 3.5" exhaust, its gone from 338kws to 355kws and spools a lot earlier.

Happy Happy :cheers:

To all the exhaust buffs.

Just picked the car up now with a full 3.5" exhaust, its gone from 338kws to 355kws and spools a lot earlier.

Happy Happy :cheers:

Thanks for letting us know. Thats a handy little increase and it confirms what is expected WRT power and spool. If it were me, next step would be to try a decat on the dyno to see if there's any potential for a better result with a bigger (5 inch?) cat.

  • 6 months later...

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com.au/itm/SARD-INJECTOR-800CC-Twin-RB26-SKYLINE-R32-33-34-GTR-/140458575853?pt=AU_Car_Parts_Accessories&hash=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com.au/itm/SARD-INJECTOR-800CC-Twin-RB26-SKYLINE-R32-33-34-GTR-/140458575853?pt=AU_Car_Parts_Accessories&hash=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

have you looked at Deatschwerks injectors?

straight drop in (they're high flowed stockers)

have you looked at Deatschwerks injectors?

straight drop in (they're high flowed stockers)

Shit they look excellent. :cheers:

http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/skyline-gtr-rb26dett-89-02

Any one had any experience with them? 750cc or 880cc is sweet. Given they are both $549, I'm tempted to go for the 880cc!

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com.au/itm/SARD-INJECTOR-800CC-Twin-RB26-SKYLINE-R32-33-34-GTR-/140458575853?pt=AU_Car_Parts_Accessories&hash=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

ID 1000's. Done!

800's will need new plugs, 700's have the right plug

Spray/nozzle is also different 700 to 800

I cant remember exactly which way it is, but one is twin and one is single.

Im fairly certain the 700s were the twins... (but please dont take that as 100%, cant remember when i looked @ mine :()

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com....=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

some new 700cc ones for sale here

Do ya know if the 800s are different?

I remember there being a difference at the top, just not what :wacko:

Yeah man. My 800's were a duel hole injector that needed new plugs (although I believe you can get single hole 800's, but I could be wrong), 700's are stock plugs and single hole.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...