Jump to content
SAU Community

Recommended Posts

hey,

I car is making a Kluck, it doesnt happen all the time i would say around 40% of the time, it sounds like the noise is coming from the driverside rear wheel. It happens sometimes on take off (Doesn't matter on the type of take off mainly on slow ones) it make a cluck noise. also sometimes when chaning from 4th into 5th i get the same noise.

I had alook around at the back and couldnt see anything, also took everything out of my boot and look around everything is ok in there nothing is moving.

i am soo confused about the whole thing got no idea where it is coming from and what it is? can anyone help?

p.s i have stock shocks in the back

Thanks Mike :headspin:

Link to comment
https://www.sau.com.au/forums/topic/35230-car-making-a-clucking-noise/
Share on other sites

clucking problem guide

hey,

I car is making a Cluck, it doesnt happen all the time i would say around 40% of the time, it sounds like the noise is coming from the driverside rear wheel. It happens sometimes on take off (Doesn't matter on the type of take off mainly on slow ones) it make a cluck noise. also sometimes when chaning from 4th into 5th i get the same noise.

I had alook around at the back and couldnt see anything, also took everything out of my boot and look around everything is  ok in there nothing is moving.

i am soo confused about the whole thing got no idea where it is coming from and what it is? can anyone help?

p.s i have stock shocks in the back

Thanks Mike :headspin

try this

hey,

I car is making a Cluck, it doesnt happen all the time i would say around 40% of the time, it sounds like the noise is coming from the driverside rear wheel. It happens sometimes on take off (Doesn't matter on the type of take off mainly on slow ones) it make a cluck noise. also sometimes when chaning from 4th into 5th i get the same noise.

I had alook around at the back and couldnt see anything, also took everything out of my boot and look around everything is  ok in there nothing is moving.

i am soo confused about the whole thing got no idea where it is coming from and what it is? can anyone help?

p.s i have stock shocks in the back

Thanks Mike :headspin

i wasnt the one that posted the link :D .... this is something that needs to be checked out by a mechanic ...... as it could be anything ...... if its when you first start up your car it could be the aircon acutuator.

Cars make a variety of noises but ive never heard of it being described as clucking ..... its just bloody funny the mental visions im getting ..... be it anyone that posted that their car made a clucking sound they would get the same shit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...