Jump to content
SAU Community

BMW in V8SC  

97 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Apparently BMW have had talks about joining the V8SC. Normally I'm dubious about this as it's usually media speculation, but it seems like they may be serious this time. Firstly, do you agree, and secondly, do you like the idea?

Personally I like it, more diversity is a good thing. Foreign manufacturers will improve competition and thus racing, hopefully.

Link to comment
https://www.sau.com.au/forums/topic/352520-bmw-in-v8-supercars/
Share on other sites

Another manufacturer would be great. There has been plenty of rumurs about toyota and even recently I heard mitsubishi were considering designing a front engine rear drive platform that could posibly also be used in the v8sc. Bmw would be great too.

A turbocharged version of the 370z would be awsome too if nissan came on board. I dont think the twin turbo four wheel drive r35 would be allowed but the rear drive 370z may be allowed. Of coarse in naturally aspirated form it would struggle against larger capacity v8s so a turbo charged version would be great to see out there.

Apparently BMW have had talks about joining the V8SC. Normally I'm dubious about this as it's usually media speculation, but it seems like they may be serious this time. Firstly, do you agree, and secondly, do you like the idea?

Personally I like it, more diversity is a good thing. Foreign manufacturers will improve competition and thus racing, hopefully.

That is farken unastrayan!

Another manufacturer would be great. There has been plenty of rumurs about toyota and even recently I heard mitsubishi were considering designing a front engine rear drive platform that could posibly also be used in the v8sc. Bmw would be great too.

A turbocharged version of the 370z would be awsome too if nissan came on board. I dont think the twin turbo four wheel drive r35 would be allowed but the rear drive 370z may be allowed. Of coarse in naturally aspirated form it would struggle against larger capacity v8s so a turbo charged version would be great to see out there.

You realise that the JGTC R35 GTR is a V8? Well at least the GTR running around GT1 in Europe is a big V8. For Nissan to be let in it would need to be their four door Skyline platform wkth R35 V8. Unfer the skin can almost be a control chassis, but 4df Skyline panels and homologated v8

All for it as the racing is quiet close and entertaining, but thede days can do with more variety

Right u are roy. I dont follow either series close enough to know exact ruling on what platforms are allowed but yes of coarse I didnt even think of the 4 door thing when thinking of 370z.

I do remember reading about gtr using v8 in the jap series now come to think of it but I dont ever watch or follow it so my knowledge of the series isn't great.

Maybe I just really wanted to see a turbo charged platform in there so I got a little excited lol. I miss the atcc days lol.

You realise that the JGTC R35 GTR is a V8? Well at least the GTR running around GT1 in Europe is a big V8. For Nissan to be let in it would need to be their four door Skyline platform wkth R35 V8. Unfer the skin can almost be a control chassis, but 4df Skyline panels and homologated v8

All for it as the racing is quiet close and entertaining, but thede days can do with more variety

you mean like the F50 that rocks a VQ in a land barge RWD platform? Or the relatively smaller C35 sedans? Neither sold in oz tho in full volume.

I thought the restrictions in place in v8supertaxi's meant that both bogan sleds were essentially the same shit with different shells? I doubt BMW or Nissan for that matter would be prepared to Nascar it up for a fringe consumer group like australia.

Is the jgtc v8 powered r35 in a rear wheel or four wheel configuration. Im assuming four wheel still?

So that engine in front of the hollinger box the v8sc series currently uses in rear wheel drive config. a conrol chassis and 4 door panneling as you mentioned. Sounds awsome to me. Cant see it happening but sounds great non the less lol

I think I'd start watching Bathurst again (last enjoyed it in 1992) R32 GTRs, E30 M3s, Sierra Cosworths etc)

The more manufacturers the better in my opinion, but it does go against the financial spinoffs that Holden and Ford see with the current layout.

(please no New Zealander bashing :) )

to clarify - AFAIK there has been NO use of turbo in JGTC (now GTC) for YEARS now...

reason being is becuase of the power regulations means that turbo lag plays a huge part in the cars ability to corner etc...

nissan GTR is a V8..

cerumo / toms / woodone supras were all V8..

they're just very very highly tuned V8's so that there is lots of peak power but also low down torque as well..

back on topic!

do i think it's a good thing...

...well yeah sure, why wouldn't i want to see another contender in a racing series with two dedicated manufacturers that make two very similar cars..

but as shan said... the commodore / falcon cars are essentially the exact same guys just with different shells..

I think I'd start watching Bathurst again (last enjoyed it in 1992) R32 GTRs, E30 M3s, Sierra Cosworths etc)

The more manufacturers the better in my opinion, but it does go against the financial spinoffs that Holden and Ford see with the current layout.

(please no New Zealander bashing :) )

whil I love group C and group A cars, th racing was f**king crap, was all about who had the most money and that was it, having the top 10 spread out by 2 laps after 10 laps of racing is boring.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...