Jump to content
SAU Community

Recommended Posts

I've come up with this after the 2011 supercab thread with teams somehow getting an extra few laps from the car without running out of fuel.

So what have you seen/heard on the grapvine/read etc, and is it good or bad.

Things like the Ferrari F1 4L "fuel cooler"

Nascar teams filling the cage/chassis with wet sand so they meet minimum weight at Scrutineering, then over the course of the race it dries out and falls out the bottom of the car.

Or in Snowy's case, running the R33 gearbox in the 34 at Targa.

I feel that things like filling the car with wet sand is just blatent cheating, but running larger/multiple fuel lines is clever, or running a 5 speed instead of a 6 speed offers no real advantage.

What do you guys think

Link to comment
https://www.sau.com.au/forums/topic/354280-bending-the-rules/
Share on other sites

i love these advances in technology that take a while for other teams to copy. ie:

renaults mass damper in 06

ferraris 'through the nose' hole back 08

ferraris wheel covers and the amazing wheel nuts to allow them

mclarens individual left/right rear brake pedals

mclarens f-duct

also check out smokey yunicks stories here :]

http://www.circletrack.com/ultimateracing/ctrp_0801_smokey_yunick/index.html

I remeber a guy from work who is an F1 nut told me that there was case where a team was found out using a flexible rear wing that had a high angle of attack at low speeds but when it hit higher speeds it flexed down and flattened out to cause less drag.

He also reckons that Micheal Schumacer would never have won so many championships if it wasn't for his team "pushing the envelope" of what was allowed in the rules regarding fuel loading, engine power, traction control etc.

I remember reading about the Gibson motorsport team using a fire extinguisher to cool engine temps as the rules stated you had to carry an onboard extinguisher system.

The rules said nothing about it having to be full at the end of the race.

Another one was Fred Gibson running a larger than standard/homologated intercooler and when the CAMS scrutineer found the item on the race car did not comply, asked him to replace it. As Gibson Motorsport were backed by Nissan then, he had an exact same intercooler (that was still oversize) on stand by wrapped in Nissan packaging. So replaced with this, the scrutineer was satisfied it was a genuine part.

I personally don't agree with "bending" the rules, as there is a fine line between that and cheating. It seems some people try there darndest to justify their cheating by saying it's "bending" the rules and not "breaking" the rules.

I remember reading about the Gibson motorsport team using a fire extinguisher to cool engine temps as the rules stated you had to carry an onboard extinguisher system.

The rules said nothing about it having to be full at the end of the race.

Another one was Fred Gibson running a larger than standard/homologated intercooler and when the CAMS scrutineer found the item on the race car did not comply, asked him to replace it. As Gibson Motorsport were backed by Nissan then, he had an exact same intercooler (that was still oversize) on stand by wrapped in Nissan packaging. So replaced with this, the scrutineer was satisfied it was a genuine part.

I personally don't agree with "bending" the rules, as there is a fine line between that and cheating. It seems some people try there darndest to justify their cheating by saying it's "bending" the rules and not "breaking" the rules.

That reminds me, the 05 Mobil Sierra of Peter Brock was said to have had an extinguisher nozzle pointing at the turbo, was allegedly found by one of DJRs crew chiefs, but by the time the tech inspectors arrived the 05 car was behind a locked garage.

I have no issue with bending of the rules; if you're team is more dedicated to finding loopholes and clever enough to execute it then more power to you!

Porsche were kings of this in the 60's, 70's and 80's.

Breaking the rules (such as the sand trick) is a different story.

That reminds me, the 05 Mobil Sierra of Peter Brock was said to have had an extinguisher nozzle pointing at the turbo, was allegedly found by one of DJRs crew chiefs, but by the time the tech inspectors arrived the 05 car was behind a locked garage.

I can also confirm that a lot of the group A Sierras ran turbos that weren't exactly rule abiding inside....and thats from the guy who worked on them :)

Lets face it, winning motorsport is all about building a car that meets the rules but is magically quicker than everyone elses - if there is no bending the rules, or another way to put it "interpretation of the rules" then most of the team engineers would be out of a job!

Subaru ran a class in the ARC a few years back for 2.5 RS Imprezas, which I was lucky enough to compete in, but as 1 make series which was primarily being run by their marketing dept it was unreal the cheating that was going on! Spec C shells, Cars that were allowed nothing more than a control exhaust blowing flames, and making 100awkw, when ours made 80 at the hubs... (with an illegal STI fuel pump) Cars with 3 open diffs, that would spin the inside rear driving around a car park... Funny thing is that as one of the people who was not doing that and was left looking slow because of it, my frustration was with the Scruitineers etc for not finding it, the guys doing it, well good on them for being that creative.

Brocky's Sierra had the extinguisher pointing at the intercooler during qualifying for Bathurst, and was found, and he was pushed down the grid for it.

Edited by iplen

I remeber a guy from work who is an F1 nut told me that there was case where a team was found out using a flexible rear wing that had a high angle of attack at low speeds but when it hit higher speeds it flexed down and flattened out to cause less drag.

He also reckons that Micheal Schumacer would never have won so many championships if it wasn't for his team "pushing the envelope" of what was allowed in the rules regarding fuel loading, engine power, traction control etc.

Ferrari have a history of "bending" the rules or manipulating people to let them break the rules.

whist yes its cheating and cheating is bad. its only cheating if you get court out.

it would be good to know half the stuff thats done that doesnt get picked up on.

somthings are also good engerneering and can help outher people out. if the engerneers didnt have to think outside the box there would never be any new developments.

One of the local rally guys bought a ex factory ARC Subaru and blew a head gasket. He went to Subaru and got a EJ20 gasket and it didn't fit, so he got another one thinking they'd given him the wrong one... then he got a EJ25 one and it fitted. Turns out the factory subies were running EJ25's stapmed as EJ20's.

Best rumour I've heard is that the group b Lancia Delta S4's were hiding nitrous in the roll cage

I understand they got out of the sport (and assume this was purchased around then?) and know where you're coming from, but I still think that a bit of nouse would be used in case they ever wanted to re-join.

I'm not saying it's completely discountable, but even I went to a lot of effort to sneak out the Hemi V8 in the Targa car prior

to the finish scrutineering. And I'm small fry compared to a factory team!

n836354571_2108060_5322-1.jpg

What's the point of having class rules then? May as well just compete in a "no rules" form of racing.

I have a competitive sailing background and we have one design classes where nothing can be changed from the manufacturer. Think Olympic classes with boats such as Laser, 470 and 49er's.

The idea is to give everyone a level playing field. You should be able to hop from one boat (or car) to another in the same class and the only difference is the driver.

Then there are development classes which virtually have no rules except "must be 12 feet long" for example. This way you get to choose what suits you. If you want to be creative and smart, go the development class. If you want fair/level racing go one design class.

To hear about the cheating in the RS Impreza challenge is absolutely woeful. It breaks all the rules and ideas behind a one make series.

It's a moral and ethical issue for me.

Getting away with it cause you didn't get caught doesn't cut it with me.

Edited by nismoman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
    • There are guys on Facebook under, Infiniti Owners Australia   https://www.facebook.com/share/g/1Z3RbPqx4k/?mibextid=wwXIfr What Whp are you after and I can help, and join this Q group in the states. https://www.facebook.com/share/g/19A59cN3JR/?mibextid=wwXIfr
    • Does any of you guys have instagram pages for your builds? Keen to see some Aussie builds. I still can't figure out how to post photos in here.
    • That awesome thanks for that. 
    • You can Remote any of these VR30..globally  Check: AMS Performance | Racebox | Sonic Tune | Soho | Z Motorsports | Specialty Z    Performance Parts | AMS | Z Motorsports | Boosted 6 |    Exhaust | Fast Intentions | ARK | MBRP Motordyne | Borla    There is someone in Sydney with 650whp   I am at 430whp without flex fuel, but FBO & Flex-fuel will push you to 500whp!!  
×
×
  • Create New...