Jump to content
SAU Community

Recommended Posts

Yeah thanks, i originally saw the post in the Cosmetic section i think and didn't like any of the ones posted, then a late night cruise on Ebay and i saw this one and for less than $30 delivered it gets rid of the ugly plastic cap and helps highlight Craves handy work... If you want one and cant find it i should still have the shops details somewhere :thumbsup:

Looking good man. Seriously, if my engine bay looks half as good as yours by the time I'm finished then I'll be a very happy man :D Mine needs more high-mount though :(

With regards to the turbo beanie, I think it will work perfectly man. Does it fit nicely onto the turbo? Unless it's a bit loose, I can't see it being an issue. I was reading through some of my HPI magazines last night looking for ideas, and I noticed that almost all of the cars that had high mounted turbos with a turbo beanie had the beanie sitting hard up against the rocker cover, and they all work fine.

pm me those details if you can find them!

nvm found it for 29.50 delivered :)

Not a bad looking part for the money, and delivery was really quick too!

Looking good man. Seriously, if my engine bay looks half as good as yours by the time I'm finished then I'll be a very happy man :D Mine needs more high-mount though :(

With regards to the turbo beanie, I think it will work perfectly man. Does it fit nicely onto the turbo? Unless it's a bit loose, I can't see it being an issue. I was reading through some of my HPI magazines last night looking for ideas, and I noticed that almost all of the cars that had high mounted turbos with a turbo beanie had the beanie sitting hard up against the rocker cover, and they all work fine.

Haha yours will be nice and shiny, mine is dull and black....

The beanie is a loose fit, the guys i got it from had a smaller one but suggested the one i have.... I asked Simon-S14 if he had issues with heat in his thread and he said even with HPC coating etc it melted paint, but he was at full boost 90% of the time, mine will be opposite.... It is a tight fit in terms of Cam cover and tower but i left the tie wire off so i can ask JEM if it is fitted correctly....

YES you need more high mount :P

Not a bad looking part for the money, and delivery was really quick too!

Haha yours will be nice and shiny, mine is dull and black....

The beanie is a loose fit, the guys i got it from had a smaller one but suggested the one i have.... I asked Simon-S14 if he had issues with heat in his thread and he said even with HPC coating etc it melted paint, but he was at full boost 90% of the time, mine will be opposite.... It is a tight fit in terms of Cam cover and tower but i left the tie wire off so i can ask JEM if it is fitted correctly....

YES you need more high mount :P

I nee to sort my life out and make a decision on an oil filler cap. Spending more time thinking about that than I did about what fkn turbo I was getting :P As for my engine bay, PARTS of it will be shiny. The rest is still greasy and filthy and looks shit glare.gif Tempted to just rip the engine out and get stuck in with a toothbrush, if only society didn't irk me with responsibilities, I'd have the best engine bay! :P

Ahh ok, I still daresay the beanie will be better than nothing. My engine bay gets HOT after a run, and I haven't had a chance to take it out on the track yet. That's the one thing I don't like about having the gate mounted on the rear turbo housing, it means I can't use a beanie. I would get it HPC coated but have been told it does nothing really, for the money it's just not worth it.

Tomei Type B Poncams ordered... Should be here in a few weeks i hope...

I am selling some of the interior stuff so i can at least get the car driving as a daily again, the Recaro is now gone but it paid for the Cams so a fair trade :D

i hope you got the type b valve springs for those cams (retainers are a good idea also) as a few people have spat out a shim when running standard springs which basically destroyed the head and pistons..

You are probably now freaking out but it was better to tell you for insurance sake if you plan on tracking the car a bit..

p.s. yay more money to spend :P

i hope you got the type b valve springs for those cams (retainers are a good idea also) as a few people have spat out a shim when running standard springs which basically destroyed the head and pistons..

You are probably now freaking out but it was better to tell you for insurance sake if you plan on tracking the car a bit..

p.s. yay more money to spend :P

Hmm yeah i have heard a couple of instances where that has happened but these will be going in for now and the springs and retainers will all be done in a few months time when i get the head taken off, this wont see the track until all of that is done, it will be doing daily duties on low boost for a while :thumbsup:

And there is ALWAYS more money to spend when you play with cars :P

Id be waiting to install the cams when you have the rest ready, springs etc... if its just needed for daily duties for the the time being...

you'll only need to install them again later on, sounds like doubling handling for no reason to me...

Yeah there will be a bit of double handling involved... I should have taken the head off when all the manifolds were off but didn't give it a thought...

The engine wont get pulled down for a while so i might just slap them in and run a lower boost/limiter and just enjoy cruising for a while...

When you going E85?

enjoy the lumpy idle...thumbsup.gif

haha when I get time to install the parts...

Ive been saying that a while now and all the parts are sitting there waiting, just need lines and fittings...

was waiting to see how hanaldo went with sourcing and installing his lines etc...

so I guess I should order the lines and fittings and get to it...

but I also have a rebuilt gearbox to install too, so clutch and box install before more power and another tune may be a good idea too...

so Im in training to bench press an rb25 box into my car whilst laying on the garage floor... lol...

enjoy the lumpy idle...:thumbsup:

haha when I get time to install the parts...

Ive been saying that a while now and all the parts are sitting there waiting, just need lines and fittings...

was waiting to see how hanaldo went with sourcing and installing his lines etc...

so I guess I should order the lines and fittings and get to it...

but I also have a rebuilt gearbox to install too, so clutch and box install before more power and another tune may be a good idea too...

so Im in training to bench press an rb25 box into my car whilst laying on the garage floor... lol...

I dont think Poncams are that lumpy? They are only 260's...

I'm just going to run it through Efi line for now as apparently most new line is fine, its only the stuff that's submersed in the fuel tank that i will have to get the proper stuff as i dont want any issues there... Hanaldo has done a good job with the braided line etc and ill do all that when i do the engine, for now we will just see what happens :)

You should pull your finger out and get it done, your as bad as me with procrastinating lol..... But in terms of tune, choose wisely :glare:

If you need a hand with the box let me know, i'm not that far away :thumbsup: And train hard as they are a heavy bitch when you gotta do it on the ground.... I went to buy a hoist the other day for my shed but MUST finish the car first :P

Jeebuz Matt isn't this this running yet! ;)

Looks good man, the black theme has worked really well IMO.

I still like my bling though :) must've worth at least 11ty more killerwasps

And YOU.....shuddup :P

Thanks, was pretty happy with the black and the way it looks, not exactly stock looking but -

post-47580-0-58152100-1333413481_thumb.jpg

I see you've run out of things to Powdercoat? :no:

Yep lol.

Although I still want to clean up my rims at some stage so Craved will get more work out of me yet.

Not in a hurry for that though, gotta address my knock problem first and get some new rubber.

Yep lol.

Although I still want to clean up my rims at some stage so Craved will get more work out of me yet.

Not in a hurry for that though, gotta address my knock problem first and get some new rubber.

Rims are next on my list, was going to get them to Craved for coating but considering just spraying them with the help from a mate (Blitz-26) for now as a cheap option...

Not sure whether to just spray the XT7's in black/gunmetal and then sell them and get something else later..... After the damage i kind of lost interest in them.....

I'd like to have the same size front and rear so I can rotate tyres but I always seem to spend the monies on random sh1t

Yep, i want 9.5 all around... Even a set of 34 GTR rims would be nice...

Was just looking through old stuff and found a bit of a comparison -

Before - post-47580-0-12429000-1333420567_thumb.jpg And After post-47580-0-10851700-1333420637_thumb.jpg

  • Like 1

fking Nissan, don't understand why they didn't paint the RB25 neo rocker covers!!

should've powdercoated the turbo housing black as well :thumbsup:

TBH with the plastic cover, TB and pipe and hoses and wiring across the back you cant see the covers....I assume that was a big part of it, but they looked pretty bad!!

I considered the turbo housing and was told NO by mates... So that one has mixed opinions...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought Australia got rid of the "drag dodgy fuel up to 91 RON with ethanol", which is why all E10 advertise as "up to 94 RON" ? Anyway I put E10/91 in the missus' Mazda because she empties the tank weekly, when all my cars get 98RON. tl;dr - turbo - 98 RON, if you can't afford that, sell it and get a commuter car (or tune your car for 91, which no one does).
    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
×
×
  • Create New...