Jump to content
SAU Community

Recommended Posts

i wanna go for a drive but cant, i did my back and cant move :(

did anyone read this? it doesnt really explain what it is. it sounds like something you would find on ebay.

http://www.heraldsun...2-1226173968082

Brock had some idea, consisted of getting magnets/crystals and attaching them to the engine. These "polarisers" were meant to change the direction of energy and blah blah to make more power.

Something along the lines of that. Google it, i haven't heard about it in a long time.

Wasnt aware they were $3.5k rims :(

Might go with a cheaper alternative like mohomo has on his car

Nah, don't get Mo's wheels, it look like arse.

Get Varrostens, $1k and up.

What is this?

I can't even....

IMG_1017_small.jpg

It's 370Z wheels.

350z wheels?

Actually, read above.

@ScottyDoesntKnow

"An Energy Polarizer transmits a high energy mainly generated by the vehicle to which it is attached.

This high energy field - A.B.A. Energy - causes all molecules in it's sphere of influence to be aligned or polarized to the direction of the high energy transmission, and are held in a linked or aligned state.

These molecules are subject to a vibratory rate dictated by the Polarizer.

The printed circuitry in a Polarizer causes a multiplicity of frequencies to be transmitted, affecting each molecule and allowing that molecules and it's environment to absorb specific vibration levels including noises, vibrations resonance and impact harshness which are always present in any vehicle and also to dampen out the effects of imperfect manufacture of vehicle components.

The overall effect on a motor car is to absorb road shocks more completely and quietly, to reduce overall vehicle noises - both inside and outside - to achieve greater efficiency of the power train and steering systems, improving the engine and suspension performance and to create a more pleasant environment for the driver and passenger.

Certain frequencies have not been "tuned out" as they are necessary for increased road safety.

The energy transmitted from the "Energy Polarizer" always flows to that area most effected. That means a major problem area still remains a problem, and the energy is effectively wasted on that area since the overall vehicle is deprived and consequently is less enhanced. So a correctly manufactured and maintained vehicle will always be superior to one that is not, but all vehicles benefit from the fitment of an Energy Polarizer.

It should be noted a vehicle which normal requires high octane leaded fuel is then able to operate on low octane (92) unleaded fuel, without any ill effects whatsoever, when an Energy Polarizer is fitted.

Tyre pressures must be lowered to maximise the effect of an Energy Polarizer. Recommended tyre pressure:-

Standard and 60 series tyres - 24 P.S.I (165 k.P.a).

45 / 50 / 55 series tyres - 22 P.S.I. (150 k.P.a).

Light trucks and commercial vehicles - 30 P.S.I. (210 k.P.a.)"

@ScottyDoesntKnow

"An Energy Polarizer transmits a high energy mainly generated by the vehicle to which it is attached.

This high energy field - A.B.A. Energy - causes all molecules in it's sphere of influence to be aligned or polarized to the direction of the high energy transmission, and are held in a linked or aligned state.

These molecules are subject to a vibratory rate dictated by the Polarizer.

The printed circuitry in a Polarizer causes a multiplicity of frequencies to be transmitted, affecting each molecule and allowing that molecules and it's environment to absorb specific vibration levels including noises, vibrations resonance and impact harshness which are always present in any vehicle and also to dampen out the effects of imperfect manufacture of vehicle components.

The overall effect on a motor car is to absorb road shocks more completely and quietly, to reduce overall vehicle noises - both inside and outside - to achieve greater efficiency of the power train and steering systems, improving the engine and suspension performance and to create a more pleasant environment for the driver and passenger.

Certain frequencies have not been "tuned out" as they are necessary for increased road safety.

The energy transmitted from the "Energy Polarizer" always flows to that area most effected. That means a major problem area still remains a problem, and the energy is effectively wasted on that area since the overall vehicle is deprived and consequently is less enhanced. So a correctly manufactured and maintained vehicle will always be superior to one that is not, but all vehicles benefit from the fitment of an Energy Polarizer.

It should be noted a vehicle which normal requires high octane leaded fuel is then able to operate on low octane (92) unleaded fuel, without any ill effects whatsoever, when an Energy Polarizer is fitted.

Tyre pressures must be lowered to maximise the effect of an Energy Polarizer. Recommended tyre pressure:-

Standard and 60 series tyres - 24 P.S.I (165 k.P.a).

45 / 50 / 55 series tyres - 22 P.S.I. (150 k.P.a).

Light trucks and commercial vehicles - 30 P.S.I. (210 k.P.a.)"

thanks for that. well it looks like holden are going to be putting them in there cars i wonder if they will work?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...