Jump to content
SAU Community

Recommended Posts

What speed is say 4,000 rpm? Do you have an old graph of the stock turbo?

Probably 120kph'ish dunno why he does it in speed and not rpm.. :s

I have one but it's from dr drift. Who basically fkd the tune.

The last one cihan did is on his website I'll get it later

You said you were limited by injectors yeah? What is the estimated figure if no restriction on 98 octane?

No idea. Planning on running it at 25psi later down the track. The turbo goes out of efficiency only after that so it should crack the 300 on pump no worries. People are doing that with a .63 with a .82 it can only be less restricted

The drop in power up top is a spark issue. Looks like I'll be needing splitfires for anymore power, and cihan(tuner) reckons there's a bit more in it for 98, plus quite abit for e85

Not bad, midrange is a bit lacking but that's to be expected with 2L and .82 rear. Ethanol will help that a bit

Not bad, midrange is a bit lacking but that's to be expected with 2L and .82 rear. Ethanol will help that a bit

Yeh so it shows. But it's picks up revs too quickly to really notice while driving. Ethanol should make of all the better!

Pancakes + butter + maple syrup + ice cream + chocolate fudge + wafers + almonds. Feeling kind of fat...PP strikes again.

Unrelated, did not know there were 9000 bodies buried under Queen Vic market.

The_More_You_Know.jpg

Pancakes + butter + maple syrup + ice cream + chocolate fudge + wafers + almonds. Feeling kind of fat...PP strikes again.

Unrelated, did not know there were 9000 bodies buried under Queen Vic market.

The_More_You_Know.jpg

sandra sully with the late news there buddy.

thats why the support beams arent secured in the ground, but instead on massive cement blocks.

the construction workers were sick of diggin up dead peepz skull n shiiiet... ANNNND why they do haunted night tours :yes:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...