Jump to content
SAU Community

Recommended Posts

I've yet to see one on the road. Might wait for the STI tuned BRZ coming out next year, has 50 more hp (still N/A.) I've got a bit of time to decide seeing as they sold out the entire years allocation in 3 hours today.

still worth throwing in power fc and getting a tune if im not changing turbos for a while?

Whack it in and get it tuned then enjoy 240-260rwkw, Harsh did 275rwkw with pods, exhaust and boost restrictor removed on stock turbos.

Is the clutch still holding up ok?

Dooo eett!!

Last time Grant let me drive it, it needed more powah!

Yep, it does need more power!

Whack it in and get it tuned then enjoy 240-260rwkw, Harsh did 275rwkw with pods, exhaust and boost restrictor removed on stock turbos.

Is the clutch still holding up ok?

Yep, it does need more power!

Oh herro Grant. When you back from overseas?

Gonna step back in a GTR or are you over it now :)

lol nope happy with my motard - 1 less rego and insurance to pay off + need the cashola

I never rode that bike anyway

You would have if it did 0-100 in 2.9 seconds :P

Oh herro Grant. When you back from overseas?

Gonna step back in a GTR or are you over it now :)

Hello Mr Accountant, might be back in 2-3 weeks time, gotta explore bit of europe for 2nd time before potentially heading back this soon.

Might get another GTR and not growing up at all, if I'm back, I gotta get myself a job first though.

Man of Birds you still selling Syn-X 6000? If so how much. PM me if you want

Cut off distributorship with GW, sorry mayne. Can probably get it from a GW retailer cheaper than you could have through me anyway.

Whack it in and get it tuned then enjoy 240-260rwkw, Harsh did 275rwkw with pods, exhaust and boost restrictor removed on stock turbos.

Is the clutch still holding up ok?

Yep, it does need more power!

surprisingly it is! it slips ever so slightly..

i cant say i drive it hard though, i baby it around nearly everywhere, i was actually looking at clutches last night, like 800$ cheaper to get coppermix comp straight from RHD than anywhere here, which is a pretty big mark-up..

also i may hold up on the pfc for a few months until everything else is done then take it to trent for a tune.

also yes come back get another gtr

surprisingly it is! it slips ever so slightly..

i cant say i drive it hard though, i baby it around nearly everywhere, i was actually looking at clutches last night, like 800$ cheaper to get coppermix comp straight from RHD than anywhere here, which is a pretty big mark-up..

also i may hold up on the pfc for a few months until everything else is done then take it to trent for a tune.

also yes come back get another gtr

Either get a Nismo Copper Mix or an Exedy Heavy Duty Clutch.

Nismo clutches are made by Exedy.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...