Jump to content
SAU Community

Recommended Posts

Actually I have them now, and hair nets to go with them.

Tony remind me b4 committee meeting and I will bring a couple along for u to try out

M

Cheers Martin!

I have a spare open face, just in case the scrutineers knock back the old Doohan Arai as it has a few chips in the paint. And another spare Arai for mates somewhere if you need to borrow one.

As mentioned you can buy helmets pretty cheap now, less than $200 for a good one.

Maybe bring it just in case I get knocked back!

Hopefully the 4000's I got with the new T3 slots will be better, the only issue so far was a little shuddering when red hot at PI, perfect stopping normally though.

I got the new DBA 4000's with the new slots as we'll. Apparently they don't crack as easy, so fingers crossed!

Cheers Martin!

Maybe bring it just in case I get knocked back!

I got the new DBA 4000's with the new slots as we'll. Apparently they don't crack as easy, so fingers crossed!

well sandown park is known as the brake killer. ruined my dba's nicely lol

How can 2 (or 3) manufacturers be bringing out an identical car? Is it the same deal as those toyota/holden things they did years ago?

Probably a stupid question for all you 86 fan boys, but I haven't followed this thing at all..

Toyota and Subaru joined forces to create the new Toyota 86.

Toyota shell / Subaru engine.

Subaru version is the BRZ (Boxer Renaissance Zenith) and Scion is the FR-S.

Scion is a brand produced by Toyota for the North American market to appeal towards the Gen Y consumers.

I got the new DBA 4000's with the new slots as we'll. Apparently they don't crack as easy, so fingers crossed!

They never did crack, people just did not put enough heat cycles through the rotors before tracking it.

Do you know what sort of times you were doing around Sandown on your first time Aaron?

Though your a bit more of a hardcore driver than me

i think 1.35 was the quickest according to the vid on my phone..

first time tracking ever with 217kw or something.

Do you know what sort of times you were doing around Sandown on your first time Aaron? Though your a bit more of a hardcore driver than me

to give an idea my first time out with

168kw

2nd hand crappy hankook tyres

stock suspension

bendix ultimte pads..(they almost made it though the day)

I got a 1.33.8

So you should be shooting for low 30's high 20's

if you ever want to keep people honest about lap times you can find every-one that is registered with natsoft here:

http://www.motorsportzone.com.au/?page=lap_times

to give an idea my first time out with

168kw

2nd hand crappy hankook tyres

stock suspension

bendix ultimte pads..(they almost made it though the day)

I got a 1.33.8

So you should be shooting for low 30's high 20's

if you ever want to keep people honest about lap times you can find every-one that is registered with natsoft here:

http://www.motorsportzone.com.au/?page=lap_times

At least your tyres had a name. Mine were called something like road stone or something haha and you are a much better driver than me. Once again firt time on track ever

i think 1.35 was the quickest according to the vid on my phone..

first time tracking ever with 217kw or something.

That sounds pretty decent :thumbsup:

to give an idea my first time out with

168kw

2nd hand crappy hankook tyres

stock suspension

bendix ultimte pads..(they almost made it though the day)

I got a 1.33.8

So you should be shooting for low 30's high 20's

if you ever want to keep people honest about lap times you can find every-one that is registered with natsoft here:

http://www.motorspor...?page=lap_times

Yeah I don't think I'd be getting close to that.

I wouldn't rate myself as a driver.

I'll be turning down the boost in the R34GT-T to 10psi so should be making about ~170rwkw

Would you be happy to be my driver trainer in the morning :D?

HOWTO: Negotiating higher salary offer - K GO

If your good at what you do, and you can justify the increase then it's easy.

If you've been doing the same crap in the last year and its industry average then good luck!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...