Jump to content
SAU Community

Recommended Posts

yeh there was another turbo excel getting around a couple of years back. looked completely stock, then just tyre smoke everywhere at the set of lights. in my young years - was impressed.

found some left and used some of this on interior today:

1154.jpg

not sure if I like the 'shine'

rookie mistake brah

CASH TRAIN

did you say CAAASSSHHH TTRRRRRRRRAAAAAAAIIIIIIINNNNNNN?

Tookaiya - Keilor Rd. Been going there regularly for 7-8 years.

I've been to places like Nobu, Koko etc etc... And they are really good as well... However for the price, you will not find better that Tookaiya as it's not a fancy joint, just good quality traditional style. Massive thumbs up.

Miyako near the Langham isn't to expensive and tastes pretty good

Rode in my mates 360kw xr6 and then I jumped into a mate's 200kw EVO 8.

Xr6 was crazy quick, its a three speed trimatic and pretty much fried tyres in every gear. Quick but felt sluggish. EVO felt faster lol, is it the weight and torque?

EVO's have a very short 1st through 3rd, so their acceleration is lightning quick, hence they are so fast for a streeter really

Not only quick gears but its would still be running the stock turbo so they are made to be really responsive

all you really need in an evo (not including 8mr or 9) is a tune, exhaust, licp, ebc and 8mr/9 turbo and you will get about 230-240awkw

makes for a really responsive and fun daily, get some tephra mods tuned into it and you get this, that was basic flamage to what it could do though

An appreciation of something different and done properly isnt gay. Mr lets put a gtr bar on my r33 lol

One of the best gtsts of all time champ!

Leigh - nah still got Lexus few enquirie offers but nobody $$$ yet..

Looking like a vw polo gti branded for work

ahah nick your evo was so nice!

just got a quote back from racepace and damn they are really well priced for the work they do!

so waiting to hear back when i can get the car into them :P

found some left and used some of this on interior today:

1154.jpg

not sure if I like the 'shine'

If you are going to use it - wipe surface first with wet cloth and dry.

Then use that

Then wipe again with dry cloth

Much better result and it won't "attract" the fken dust...

But that said ring Waxit lol... SOOOoooo much better products they have.

ahah nick your evo was so nice!

just got a quote back from racepace and damn they are really well priced for the work they do!

so waiting to hear back when i can get the car into them :P

They really aren't anymore expensive than other places until you talk engine builds... But then theirs dont grenade or breathe heavy like other builders so you do get what you pay for there also ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...