Jump to content
SAU Community

Recommended Posts

Nice! Cusco, TRD and Beatrush have lots of nice braces available. Whereabouts are you going in Japan? If you're in Tokyo visit Super Autobacs Tokyo Bay and head up to the bookshop. They should have plenty of 86 magazines :)

Looking at the Carbing strut braces, but just found the price of the one I wanted to be 65,000 yen. I guess titanium is expensive.

I'll be getting Cusco camber arms, a few sets of wheel nuts, random hello kitty items haha.

Yeah exactly. Not going to bother advertising it until I have a confirmed production date for my BRZ. The Cube almost costs nothing to run. I fill up with $50 worth of 98 Octane probably every 6 weeks and it's reliable as anything.

nice, i love the cubes

Might try waffles next weekend.. I didn't know what blue waffle is, so looked it up.

f**k you guys

I forgot what it was and just looked it up too...... just been assuming that it's waffle but different flavour.. freakin ewwww~

Might try waffles next weekend.. I didn't know what blue waffle is, so looked it up.

f**k you guys

I forgot what it was and just looked it up too...... just been assuming that it's waffle but different flavour.. freakin ewwww~

success!

Might try waffles next weekend.. I didn't know what blue waffle is, so looked it up

f**k you guys

bahahahahaha pwnt

18x10 +38 nick :P

yours should be this low!

548567_456475941063992_1584553432_n.jpg

why?... that looks as gay as two guys open mouth kissing

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...