Jump to content
SAU Community

Recommended Posts

Yeh I don't want to be like everyone else and conform

besides, there's enough black in your car already :P

correction

evo = faded and pealing red

lol soooo true,,, mine are totally pink at the moment

OK we have a few SG experts on here so I has a couple questions.

I have 6 hours lay over in SG airport

really don;t feel like sitting there the whole time

I'm tempted to head into town and get me some black pepper crab after last time

the best I ahd was at Lau Pa Sat Hawkers market,

How long you think to get from airport to there around 6pm sat?

Or would I be better off hitting up East coast as much closer to Airport?

if so where to go, I tried Jumbo last time and less than impressed

any other suggestions?

Cheers

Gonna stoooopid but is the brembo just a sticker?

Yeh even standard is just a sticker, after I got the clear off I could flake off the brembo.

Lol hamish it's properly cured in the sun and I'm loving the blek., but I didn't put the stickers on straight Hahah so ill pull them off tomorrow and do it again

OK we have a few SG experts on here so I has a couple questions.

I have 6 hours lay over in SG airport

really don;t feel like sitting there the whole time

I'm tempted to head into town and get me some black pepper crab after last time

the best I ahd was at Lau Pa Sat Hawkers market,

How long you think to get from airport to there around 6pm sat?

Or would I be better off hitting up East coast as much closer to Airport?

if so where to go, I tried Jumbo last time and less than impressed

any other suggestions?

Cheers

Jumbo is tourist shit... fkn terrible food

see if changi village hawker centre has re-opened yet, if it has, just go there

if not, take the MRT to Dakota station and hit up the OLD AIRPORT RD hawker centre.

here you will find food 10000 times better than pepper crab and it's easily doable with 6 hours.

just look for the long queue's and go to those stands and just order whatever they are selling.

I had some of the best food there

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...