Jump to content
SAU Community

Recommended Posts

How does it feel to be the only person laughing at something with Mohsen hahaha

And it's to stop the centers from surface rust..

It's to stop the centres of the cheaper rotors looking like ass. RDA's don't come with painted hats (centres) and go a nice shade of brown crap after a while.

I just painted the whole rotor, fark masking it. The pads take the paint straight off the surface.

Painting rotors is fine. The centers and the vents look ugly as fk when they have rusf around them. Why go to effort of masking them for a worse looking job? As long as the person isn't expecting the paint to stay on the contact area then they aren't stupid. The stupid people are the ones who think it's gonna cause an accident etc.

I was talking about masking the outer part of the rotor... still spraying the hats and a bit of overlap onto the rotor which the pad can remove and give a round line

Agree that that rust is ugly as fuark... rotor rust I used to get every time it rained and left it overnight :P

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...