Jump to content
SAU Community

Recommended Posts

my boost gauge doesn't show any boost spike, goes to 10psi but settles down to 9psi.
During the misfiring revving pass 4k rpm, it makes a constant popping from my rear muffler from what I can tell.

I don't even know, I've been sitting here looking for excuses not to let it go...

evos are crappy little girls cars....is that reason enough...need another, your gfs car is cooler (almost) :P

Ed* oh wait you said excuses NOT to let it go...sorry I got nuthink..

1.1 is a bit big for turbo applications I thought. 0.8 is more common, stronger arc.

1.1 is standard for the rb25 but .8 is the norm for anything modded...

I just go to bursons and ask for rb20 plugs usually..they are the bpr6 blahdy blah whatever they are the ones you want :yes:

Still got it, need a normal one for roardworthy

Good for pho Sunday morning or lunch

Could even do Yum Cha

I bon bo hue

I'll let Alvin pick

my fav bun bo hue is in st albans, i dont think you guys want to drive that far right?

though yum cha @ gold leaf springy/burwood sounds good oto.

did you seriously just read all that crap we wrote to Pat about plug gaps THEN put in 1.1's already put them in? lol

take out plugs and gap to 0.8

missfire will mysteriously vanish

did you seriously just read all that crap we wrote to Pat about plug gaps THEN put in 1.1's already put them in? lol

take out plugs and gap to 0.8

missfire will mysteriously vanish

Lol as far as I'm aware, plugs wear by creating a larger gap. As the 1.1's wear they grow to 1.2+

This is when you start having misfires

It you start at 0,8 they will wear down to 0.9, 1.0

Drop to 0.8 if misfiring. Although I'm getting away with 1.1's at 220kw :)

Lol as far as I'm aware, plugs wear by creating a larger gap. As the 1.1's wear they grow to 1.2+

This is when you start having misfires

It you start at 0,8 they will wear down to 0.9, 1.0

Drop to 0.8 if misfiring. Although I'm getting away with 1.1's at 220kw :)

I'm only running fmic and exhaust, boost sitting on 9psi after those mods.

Thought I'll be alright with 1.1mm since not running much power, shall re-gap to 0.8mm and perhaps coilpacks.

Misfiring better go away before deca!

 

Drop to 0.8 if misfiring. Although I'm getting away with 1.1's at 220kw :)

 

Misfiring isn't only from increased pressure in the cylinder, it is caused by excessive amounts of fuel also. If they are running good AFR's in the top end and cylinder pressure is under control they should be able to run 1.1mm just fine, if not the coil packs may be flogged.

You are right, plugs do wear slowly. If they are wearing fast you may be overheating them, perhaps try a BPR7.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...