Jump to content
SAU Community

Recommended Posts

I'd argue that it's more important in brainless movies like I expect this to be, that the plot "twists" are a surprise. This is more of an Easter egg deal that I know I would have enjoyed finding out in-movie

you mean like "Mia I'm a cop"...that wasn't really a plot twist...unless you were Mia...then it was like SURPriSE!!!

Told her its up to her, if she wants to move forwards and away from his bullshit then I'm happy to help her do that, but the only way it's going to happen is if she puts some effort in and cuts contact with him...

If she doesn't want to do that, then I'm out.

Last night she was asleep next to me on the couch, I was going to get up and leave then sms her with "Sort yourself out over the weekend and call me when you've made a choice about what you want to do with your life"... then she woke up as I stood up. Fuuuuuu.

She said I'm distant a lot of the time, I said I couldn't completely open up to her while it was obvious that her heart is split in two... Boom: Reversal.

She knows that he's a horrible person and is bringing her down, and she knows that I'm a good thing in her life. So it's up to her to make the choice, I'll be there to move forward if thats what she wants, but not if he will be involved in any way.

You sound like a pretty nice guy Simon, she sounds silly.

I know right, I'm f**king amazing

So what's the deadline for her to sort it out? This weekend? Have you told her that since you didnt get the chance last night?

I'm not going home to her tonight, I'm staying at my parents place... That bed will be pretty cold without me.

She'll probably call me tomorrow to see what I'm up to, depending on how I feel I might leave her on Saturday night as well.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...