Jump to content
SAU Community

Recommended Posts

Hmmmm DECA.... Considering Shockworks Coilovers and Whiteline Bushes before then... Wonder if its possible within a month, working full time?

Have already done the 4 Rear K-Frame and the 4 Diff Bushes with Whiteline goodness... So just Arms and a few other bits and pieces to go?

Hmmmm DECA.... Considering Shockworks Coilovers and Whiteline Bushes before then... Wonder if its possible within a month, working full time?

Have already done the 4 Rear K-Frame and the 4 Diff Bushes with Whiteline goodness... So just Arms and a few other bits and pieces to go?

coilovers arent too hard to fit, but still needs alignment.

doing bushes DIY... yeah have fun with that :P

Hmmmm DECA.... Considering Shockworks Coilovers and Whiteline Bushes before then... Wonder if its possible within a month, working full time?

Have already done the 4 Rear K-Frame and the 4 Diff Bushes with Whiteline goodness... So just Arms and a few other bits and pieces to go?

How do the shockworks coilovers compare the the BC ones?

Richo runs BC coilovers, seems to be good enough for him at the track

coilovers arent too hard to fit, but still needs alignment.

doing bushes DIY... yeah have fun with that :P

Coilovers I've got no troubles fitting...

Bushes, I'm not going to try ghetto remove any bushes that should to be pressed, ever again ;) Mike (Miguelone) and I spent a full afternoon trying to get the suckers out of my K Frame...

https://www.facebook.com/photo.php?v=10151330100116148&set=vb.641676147&type=3&theater

How do the shockworks coilovers compare the the BC ones?

Richo runs BC coilovers, seems to be good enough for him at the track

I've heard some very good things about them, local support is nice, they're only a few hundred more than BC BR's.

Currently I'm running Bilstein Shocks and Springs, I'm about 3cm too low at the zorst, I'd like something damper and height adjustable which is still silky smooth for the street (which my current setup isn't). Car was imported in 2006 with the Bilsteins on it, so they're getting pretty old I'd say.

Coilovers I've got no troubles fitting...

Bushes, I'm not going to try ghetto remove any bushes that should to be pressed, ever again ;) Mike (Miguelone) and I spent a full afternoon trying to get the suckers out of my K Frame...

https://www.facebook.com/photo.php?v=10151330100116148&set=vb.641676147&type=3&theater

I've heard some very good things about them, local support is nice, they're only a few hundred more than BC BR's.

Currently I'm running Bilstein Shocks and Springs, I'm about 3cm too low at the zorst, I'd like something damper and height adjustable which is still silky smooth for the street (which my current setup isn't). Car was imported in 2006 with the Bilsteins on it, so they're getting pretty old I'd say.

Fair enough!

So now that your car is sorted when you coming back to the track?

yeah coilovers would be a pretty good upgrade. picking the right ones for daily use is the tricky part I reckon.

sif coilovers.

i got brand new bilstens and am getting eibach progressive rate springs.

silky smooth for daily duties and not too rolly for corners.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...