Jump to content
SAU Community

Recommended Posts

$686 still lol

Yeah was sent by a UK company they only paid 75 pounds for some reason

Overseas > Aus postage always seems ridiculously cheap compared to Aus > Overseas. Window visors I had to send back to Japan(Which ended up being bounced back to me -_-) cost me over $50 to send back but the yen value on the original shipping labels only worked out to be about $15.

I gotta move to different store.

Spotted my old R 5 mins after finishing work, didn't realise until I saw superlaps...

Anthony, if you happen to be reading this, what kelvin are your headlights?

Where abouts Grant?!

I'm running 6000K Kaixen kit from OTR.

Had cheaper kit from autobarn before but one kept going out..

Saving for those S3 xenons lol

Where abouts Grant?!

I'm running 6000K Kaixen kit from OTR.

Had cheaper kit from autobarn before but one kept going out..

Saving for those S3 xenons lol

Fitzsimmons and Reynolds, around 11.05-10, I went opposite direction to home.

Your lights are so blue, I thought it was a 32 for a moment there...

Didn't realise it's you until I remembered you'd replace the panas with superlaps.

And can I have the panas back? Pretty please?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...