Jump to content
SAU Community

Recommended Posts

How many litres did you fill it up with? I'm guessing around 50 litres, in which case that's pretty normal economy for a Skyline. And if it hasn't been done, changing the oxygen sensor can help your fuel economy. But I wouldn't be bother if you net around 400km from 50 litres.

A light will come on when the needle is near the E and you'll still have 20km or so left. It's a 60 litre tank.

When i filled it up it was on the 2nd last bar, i filled it up all the way with 100 octane which costed me $65, i think i got around 35 litres before it wouldnt go anymore, it was $1.65 per litre and i put $65 in, so whatever that adds up to is how much i filled it up before it wouldnt go anymore.

My sender is acting funny also.

Haven't bothered to clean it, as long I get at least 400km out of the tank s'all good.

I've managed bit over 500 on a tank before fillin it up today.

When i filled it up it was on the 2nd last bar, i filled it up all the way with 100 octane which costed me $65, i think i got around 35 litres before it wouldnt go anymore, it was $1.65 per litre and i put $65 in, so whatever that adds up to is how much i filled it up before it wouldnt go anymore.

Your fuel economy is fine for an N/A 2.5 6 cylinder of that age. If you used 39 litres and got 350km, that's around 11L/100km.

I don't think your fuel sender is terribly inaccurate either. If you assume that half a tank is 30 litres and you were on the next bar, 39 litres isn't a stretch. There's still a good 7-8 litres left after the needle touches the last line.

I wouldn't worry about running out of fuel until your fuel light comes on. It's a bit past the last line on the gauge, just before the needle touches E.

OP6 vs 21U housing - do they share the same bolt pattern and distance from flange to firewall? Thinking of buying a blown 34 turbo to highflow to net an extra ~20hp headroom.

Same bolt pattern, not sure about distance, but it doesn't matter, cause OP6 has been fitted many times without issue. If you're going through HG just give him a 2IU housing and get an SS1PU.

  • Like 1

Might pick up some injectors tonight.

If so, that's pretty much everything for first round of mods! Will just need to install all the parts + tune. Yayerr. :D.

Although still deciding whether I have enough cash moniez to also grab aem afr/boost gauge.

Same bolt pattern, not sure about distance, but it doesn't matter, cause OP6 has been fitted many times without issue. If you're going through HG just give him a 2IU housing and get an SS1PU.

Doesn't the SS1PU push the exhaust back even further, or has Tao fixed that? Have you had any long-term issues with yours?

Doesn't the SS1PU push the exhaust back even further, or has Tao fixed that? Have you had any long-term issues with yours?

The SS1PU pushes it back further because it's a new turbine housing, not just a high flow of the stock housing. I've had no clearance issues issues, there was plenty of room for my exhaust...still is. Air con drip hose (?) was slightly touching the dump pipe, but I tied it back and it doesn't contact anymore.

Will do a detailed post in the HG thread later today to kill some myths, as I've seen a bit of garbage posted in there lately.

..Will do a detailed post in the HG thread later today to kill some myths, as I've seen a bit of garbage posted in there lately.

Yeh that would help a lot, there are so many conflicting statements made about that turbo.

Post up your setup+results to go with it

just went to look at a new GTi.

I could not believe how bad the service at the dealer was.

avoided answering questions. fairly simple ones.

ME: when the performance pack is coming out,

THEM: OH GTI's are very popular you will need to put a deposit down to get anything.

ME: what is the lead time if I want XYZ

THEM: Oh you should be happy with any we can offer you as they are very popular.

SO I had looked on their site and they have some optional wheels that I liked more Lighter and wider.

ME: How much are the wheels I saw on the VW site.

THEM, oh I couldn't option them, the normal ones are too popular, you could get them from the spare parts department later if you wanted but we could get you some cheap tyres to put on them!

ME: How much is the sunroof on one

THEM: the GTI is a very good buy as they now have capped priced service.(!!!)

ME oh ok how much is the capped price service

THEM, OH we have not set the price yet but is is sure to ber very cheap. I can tell you the price of the Series6 GTi but it won't be the same.

so frustrating.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...