Jump to content
SAU Community

Recommended Posts

I run ID's and if it's below 10 degrees my cars a bitch to start.

If the car has been on the trailer over night in winter and I try to start it at the track I have to wait for the temp to get up to about 10 before it will start.

It was tuned on a 35 degree day which probably didn't help.

Yeah on warm days, even anything above 15 degrees it starts first crank. Cold weather like today you can't even hear it fire a cylinder for the first couple of cranks.

  • Like 1

ive read a few articles mentioning the same amount.... maybe it could work.

id be taking it back to tuner and retuning in the cold tho....

Not a bad idea getting a winter touch up tune for it that I can switch to in the cold. Shouldn't cost too much.

yeah I didnt have any great issues either....Maybe its those crappy old Nismo injectors Birds ;)

I'd say it has more to do with the climate the car was tuned in and where you're starting it. My car gets left out on the street these days and inside the carport it does start much quicker. Pretty sure the bottom of my hill goes below sea level too, lol. Injector type or size should be pretty irrelevant; the timing and flow of them in the tune will matter more.

Besides, Nismo injectors are love...dat resale value through the roof. Just like my "outdated" PFC!

Need a tiny electric blanket around your fuel line birds.

Heh I was actually imagining doing something like this, but wrapping the whole engine. Also considered giving the fuel lines one of these

Picture+105.png

P.S. Medieval Lego ftmfw

Have a huge castle somewhere, so many trap doors and glow in the dark ghosts (actually just a regular Lego man in a ghost sleeve, but aren't they all!

  • Like 1

No, I prefer to get irrationally angry at people who get nostalgia about things that are 'silly new things that little kids are into'

Like Pokémon.

How dare this forum autocorrect and add that little thing above the E.

stupid nostalgic forum

well if your car is rwc...why worry?

sif be scared of tmu...just smile and nod politely as you do what they ask, then leave and do what the hell you want anyway

hmm only problem would be too low otherwise car is okay

always rely on much worse cars than yours to steal the spotlight. have seen bagged R32's scrape on modest carpark entrances infront of cops and they just watch to make sure no one does skids.

lol yeah this is true :P or i could just walk, market is pretty close. the melb car meets had a couple of people rev bashing and doing a skid on exit at the docklands one. :/

hmm only problem would be too low otherwise car is okay

lol yeah this is true :P or i could just walk, market is pretty close. the melb car meets had a couple of people rev bashing and doing a skid on exit at the docklands one. :/

so you get told its too low...lift it...pass...then lower it again....

E57_zps18f3d85e.gif

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...