Jump to content
SAU Community

Recommended Posts

which airline?

Virgin

I rate over Qantas, especially the entertainment system...though Qantas had scrambled eggs and hash browns for breakfast on one flight, and that's a win.

Unrelated, boss's sister is a flight attendant with Qantas and apparently airline staff hate FIFOs #@Rekin cause they just keep asking for more beer and treating them like shit...

  • Like 1

yeah each airline has pros and cons.

I used to fly virgin, but were never on time, 2 years straight of flyign every 2 weeks to syd and never arrive on time.

when I changed roles to a customer facing one and had to be on time moved to qantas they more keen to put the pedal down if running late.

most of my friends who are serious flyers paying for it themselves are on virgin however, (easier to get status if nothing else)

but if you flying Intl often,and can get status..qantas is def your friend.

Can be better than business class stuck in their individual seats :)

Though you would have needed some leg fold surely

Captain just said 40 on this A330 including business class bahahah

Only someone who hasn't been in business class would say that.

Burn

Virgin

I rate over Qantas, especially the entertainment system...though Qantas had scrambled eggs and hash browns for breakfast on one flight, and that's a win.

Unrelated, boss's sister is a flight attendant with Qantas and apparently airline staff hate FIFOs #@Rekin cause they just keep asking for more beer and treating them like shit...

So employee is annoyed because they have to do their job and not talk shit with their mates? Not like the beer comes from their pocket.

Difference with frequent flyers is that there is no longer a guilt asking for something when in actual fact it's their job to serve.

Usually happens due to running lean at idle as I found out last night, then again today with Greg's car. ;)Cams would make it much more pronounced.

You got widebands fitted guys? Why the hell not?

Interesting.

That's actually the last piece of the puzzle I need to obtain before I put all my mods in.

If anything I'm probably a bit rich atm... flames pls.

matter of interest what the difference between say me and the stereotype FIFO?

You don't seem like a bogan Neanderthal so could be that

Obviously not allll FIFO are bad but it's likely an 80/20 scenario

Just cos it's someone's job to 'serve' does not make them a slave and common courtesy should always apply

  • Like 3

So employee is annoyed because they have to do their job and not talk shit with their mates? Not like the beer comes from their pocket.

Difference with frequent flyers is that there is no longer a guilt asking for something when in actual fact it's their job to serve.

Employee annoyed cos FIFO bogans hitting on attendants, talking rudely to em and treating them like slaves. There to serve, but a bit of manners goes a long way.

As Al said, not all FIFO gonna do it, but you can imagine some of the guys on flights and in business class or the lounges compared to the other clientele who frequent these spots.,,

  • Like 1

Just bought a Wii U.

What is exams? What is money?

More like what is nintendo doing?

Dont mean to hate but the concept of that console is just so bizarre and makes no sense. You could throw all the IPs in the world at it and every game would feel like some iOS spin-off of the actual game. How you finding the tablet?

Nintendo survived as they are virtually unchallenged in their target market.

When sony and microsoft entered the gaming world, rather than try to be the 3rd option, Nintendo re-doubled their efforts with kids games and came up trumps.

No he didn't, you just got butthurt cos he was talkin smack about your scumbag bogan tradie brothers

lol @ your cheap shot, i'll bite anyways.

two points were made by Birds in his original response;

1. Serving a lot of beer - Its not coming out of their pockets & its part of their job requirement to serve, so how is that an issue? (Unless all they want to do is have an easy ride/shift)

2. Treating them rude - no disagrement here, not acceptable at any time.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...