Jump to content
SAU Community

Recommended Posts

Anyone got a dead R32/33 ignitor laying around? Happy to pick up and swap for a box of beer. I want to pull it apart to see if I can reclaim the plugs for extending the loom to an aftermarket ignition.

i do.

come get it tonight, jamies swinging by later as well.

Damn - too late - too many beers to drive.

Will grab it off you tommorrow. You are thomastown right?

What beer?

just draw me like one of those french girls. Or a virgin goat. Or asahi. If you like :)

should become a member again.

are we still doing things where we all catch up and have a laugh? or is that all over now with the era of the carpark meets...

Yeah come to a track day, or the motorkhana, or a monthly meet, or a cruise. Then we'll have a laugh.

Side Note: Does anyone else not feel safe in their daily without a fire extinguisher bolted within reach?

Either that GTR is exxy for what it is or I got a massive bargain

Not nearly as many mods and same engine situation for 5k more

Was black a factory colour? I didn't think it was but looks like the same black as mine

Lol scrap the r32 and join the gtr wagon?

I believe you should

But if considering it

There's a midnight purple 33R in Tassie for 16k with functioning engine

Hasn't put up pics yet

Also looks like I'll be paying Borci's wages for the next couple of years

Please PM me your bank details so I can give them to my payroll officer and cut out the middle man

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...