Jump to content
SAU Community

Recommended Posts

Intake and exhaust temps won't really matter anymore, unless you want to run 50psi plus. I cut the Stagea one in half and it still works well.

I'm running the stock evo cooler at 300kw. A larger cooler is just a bigger heat sink at the end of the day. Perhaps a simple water sprayer like the evo's run would sort you out?

A good bar and plate cooler is only a couple of hundred.

Intake and exhaust temps won't really matter anymore, unless you want to run 50psi plus. I cut the Stagea one in half and it still works well.

I'm running the stock evo cooler at 300kw. A larger cooler is just a bigger heat sink at the end of the day. Perhaps a simple water sprayer like the evo's run would sort you out?

A good bar and plate cooler is only a couple of hundred.

Hrm, yeah I think intake temps will reach about 80c + with more boost from memory on some posts I've seen.

I wonder what power gain you could get from doing just a pulley + injector/e85 change.. in theory you'd make the 450ish rwkw mark like the rest of the guys but the intercooler would keep it consistent and reliable I guess.

The thing is there is no stock cooler & it's supercharged so that water spray idea wouldn't work - so the cooler has to be a water to air type that sits inbetween the supercharger lid and charger, enclosed air tight so water lines need to find their way into the 'sandwich plate / core' and gets pumped back to a much larger front radiator (these kits are like ~5k)

Anyway it's not that important still makes good power, but you always want more :P

Surely if this idea was valid people would be doing it to save themselves 5k

Edited by UNR33L

I was impressed at how well the FT86 was going at PI, with just an e85 tune. (no turbo) High comp motors love it, and that's essentially what you have with a supercharger.

The main issue you have is you will be det limited, which is a non issue running ethanol. The extra torque is crazy, even if you don't push more timing into it.

Do I really have to state again that my E85 tune was done in summer.

This is very different to tuning in winter and a winter tune vice versa simply won't bode as well on scorching days. People having E85 starting troubles from both of the tuners who shall not be named suggests there is validity to my point. When ambient temperature has a huge effect on engine performance and you have a static tune that doesn't auto correct for variables...what makes anyone think there is one optimal tune for all conditions? It's always going to be a compromise.

I was impressed at how well the FT86 was going at PI, with just an e85 tune. (no turbo) High comp motors love it, and that's essentially what you have with a supercharger.

The main issue you have is you will be det limited, which is a non issue running ethanol. The extra torque is crazy, even if you don't push more timing into it.

The main reason I haven't tried it is because of it being my daily, often going for dirtbike trips in the middle of nowhere and need dat 98 availability

Maybe one day I'll give it a go..

Edited by UNR33L

Do I really have to state again that my E85 tune was done in summer

This is very different to tuning in winter and a winter tune vice versa simply won't bode as well on scorching days. People having E85 starting troubles from both of the tuners who shall not be named suggests there is validity to my point. When ambient temperature has a huge effect on engine performance and you have a static tune that doesn't auto correct for variables...what makes anyone think there is one optimal tune for all conditions? It's always going to be a compromise.

No compromise if the mapping is complete, and you have a decent array of sensors. With modern ecu's running intake air temp and Wo2 correction there should be no issues if the tuner has done his job.

Upgrading to the Haltech Elite in the evo soon, with the timing map done the rest will self tune. That should offset the cost of the ecu nicely and hopefully save me fuel down the track, let alone not having to pay for tuning anymore.

The main reason I haven't tried it is because of it being my daily, often going for dirtbike trips in the middle of nowhere and need dat 98 availability

Maybe one day I'll give it a go..

Flex tuning is probably the answer if you don't want to carry a jerry or two. That way you can run any mix of the two you like.

Hrm, yeah I think intake temps will reach about 80c + with more boost from memory on some posts I've seen.

I wonder what power gain you could get from doing just a pulley + injector/e85 change.. in theory you'd make the 450ish rwkw mark like the rest of the guys but the intercooler would keep it consistent and reliable I guess.

The thing is there is no stock cooler & it's supercharged so that water spray idea wouldn't work - so the cooler has to be a water to air type that sits inbetween the supercharger lid and charger, enclosed air tight so water lines need to find their way into the 'sandwich plate / core' and gets pumped back to a much larger front radiator (these kits are like ~5k)

Anyway it's not that important still makes good power, but you always want more :P

Surely if this idea was valid people would be doing it to save themselves 5k

E85's big card is its 107 octane rating that is more resilient to detonation and allows you to advance timing beyond what you could achieve with 98 all things equal. With this in mind, theoretically you will see a significant midrange power increase for any forced induction vehicle regardless of its intercooler setup or lack of. I see no reason it can't substitute the detonation prevention that a intercooler provides in cooling the air and therefore the mixture pre-combustion, as ultimately it's the fuel that reacts to the hot air and you're changing the fuel here.

E85 still suffers from its myths and people being scared to try something new that they've heard unfounded bad about - there's no reason XR6 turbos can't benefit from them and they do, there are plenty of them running it, just not as many as Skylines and Evos. It's just that the Jap import community jumped on E85 before the Aussie car enthusiasts did and when yours peers do mods you're more likely to do them than other people will.

No compromise if the mapping is complete, and you have a decent array of sensors. With modern ecu's running intake air temp and Wo2 correction there should be no issues if the tuner has done his job.

Upgrading to the Haltech Elite in the evo soon, with the timing map done the rest will self tune. That should offset the cost of the ecu nicely and hopefully save me fuel down the track, let alone not having to pay for tuning anymore.

But that's not a static tune nor a Power FC, which is the issue here. Ultimately people like myself have to get a winter and summer tune and even that is a compromise...else upgrade to an ECU that can auto correct or auto tune.

Flex tuning is probably the answer if you don't want to carry a jerry or two. That way you can run any mix of the two you like.

That sounds like a good yet expensive idea :P

E85's big card is its 107 octane rating that is more resilient to detonation and allows you to advance timing beyond what you could achieve with 98 all things equal. With this in mind, theoretically you will see a significant midrange power increase for any forced induction vehicle regardless of its intercooler setup or lack of. I see no reason it can't substitute the detonation prevention that a intercooler provides in cooling the air and therefore the mixture pre-combustion, as ultimately it's the fuel that reacts to the hot air and you're changing the fuel here.

E85 still suffers from its myths and people being scared to try something new that they've heard unfounded bad about - there's no reason XR6 turbos can't benefit from them and they do, there are plenty of them running it, just not as many as Skylines and Evos. It's just that the Jap import community jumped on E85 before the Aussie car enthusiasts did and when yours peers do mods you're more likely to do them than other people will.

Actually yeah there is a fair few xr6ts going about these days with it, I think they respond a bit better than the miami engine, that and people tend to mod the shit out of them a little more than the v8 boys. (much like jdm cars I guess, when you're modding to push like 2x the power or more out of them.)

The main reason I haven't tried it is because of it being my daily, often going for dirtbike trips in the middle of nowhere and need dat 98 availability

Maybe one day I'll give it a go..

Where you going for dirt bike trips that isn't a 400km round trip?

But that's not a static tune nor a Power FC, which is the issue here. Ultimately people like myself have to get a winter and summer tune and even that is a compromise...else upgrade to an ECU that can auto correct or auto tune.

I try and warn people the PFC is a 20 year old piece of dinosaur tech, and it's worth $20 in the scheme of things. There have been better options for many years but everyone still gags over them.

That sounds like a good yet expensive idea :P

Actually yeah there is a fair few xr6ts going about these days with it, I think they respond a bit better than the miami engine, that and people tend to mod the shit out of them a little more than the v8 boys. (much like jdm cars I guess, when you're modding to push like 2x the power or more out of them.)

The flex sensor is only $50, but the ecu to control it is expensive. (although at least you can then access it yourself rather than have to pay for the same tuner to access it like the Xcal pos.)

I was impressed at how well the FT86 was going at PI, with just an e85 tune. (no turbo) High comp motors love it, and that's essentially what you have with a supercharger.

The main issue you have is you will be det limited, which is a non issue running ethanol. The extra torque is crazy, even if you don't push more timing into it.

What sort of power/torque increases have the 86 people seen from it?

It's a bit more poppin irl :(

Hamish is a notorious gingham warrior, he can back me up

shirt is tits

don't miss dat import life. Skylines are fussier than women

Much prefer pushing the start button and not having to think about it

Meh... mine never broke down... cept the bigend but that hardly counts

Do I really have to state again that my E85 tune was done in summer.

This is very different to tuning in winter and a winter tune vice versa simply won't bode as well on scorching days. People having E85 starting troubles from both of the tuners who shall not be named suggests there is validity to my point. When ambient temperature has a huge effect on engine performance and you have a static tune that doesn't auto correct for variables...what makes anyone think there is one optimal tune for all conditions? It's always going to be a compromise.

Sounds like you need a better tuner bro... perhaps someone with a HubDyno for dem extra accuracies

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...