Jump to content
SAU Community

Recommended Posts

So which option give you 40 million?!

for final heist? dunno - i ended up using the people that cost the most for 100% sure completion (instead of losing shit like i did in the first heist by cheaping out), and doing the sneaky approach. ended up with ~20mil per character, plenty enough for what i need. i do like the idea though of doing a replay but not doing any of the assassination missions until after the main story if possible - can then spend massive dollars on investments instead of like 100k.

ah wait here we go

  • Hotel Assassination: Invest in BettaPharmaceuticals (BAWSAQ) before the mission. Look for a 40-50% return.
  • Multi-target Assassination: Invest in Debonaire (LCN) before the mission. Look for a 80-90% return. Immediately invest in Redwood (LCN) after selling your Debonaire stock as Redwood will see a 300% increase within days.
  • Vice Assassination: Invest in Fruit (BAWSAQ) before the mission. Look for a 50-60% return.
  • Bus Assassination: Invest in Vapid (BAWSAQ) after the mission. Ignore any graphs or green/red arrows, if the stock value is well below the "low" value, invest. Look for a 80-90% return (I had to die once before there was any change to the stock).
  • Construction Assassination: Invest in GoldCoast (LCN) before the mission. Look for a 80-90% return.

the fifth one on that other list is a random event as you drive up the west coast - dude wants you to get him to the airport and gives you a tip when you drop him off; 30% return on it.

BAWSAQ is the online one but certain stocks affected by in game actions (a la Lester's missions) are affected as such temporarily.

Sped through the main missions on my second run. Finished yesterday.

Did all of Lester's assassinations this evening. Had about 32mil on each character after final heist. Played the stocks as people have said: cpd put up the most concise guide so follow that.

Made Franklin a billionaire (he's my main guy, he owns all the properties), got a bit Lazy with Michael, only did the pre-mission investments for immediate cash in, more than enough for all his cinemas.

and couldn't give a flying f**k about Trevor.

Yeah, I had heaps of trouble at first with Trevor - too much of a psycho, and how he treats people. Had to skip all his cutscenes.

He seems to mellow out to just being weird by the end though, so it was easier to watch.

Gonna have to run through again; can't wait for PC and 1440p and mouse aiming though! Stupid thumbstick. Would give up auto-aim for mouse any day.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...