Jump to content
SAU Community

Recommended Posts

Why do it with an r33.

R34 rollers are scarce but fairly cheap.

Building something like it won't really fit many categories so why waste time and effort with an RB when there is a much larger cap inline 6 floating around now days with much more to offer.

Hang on sounds like the car I've got in the build.......

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Why do it with an r33.

R34 rollers are scarce but fairly cheap.

Building something like it won't really fit many categories so why waste time and effort with an RB when there is a much larger cap inline 6 floating around now days with much more to offer.

Hang on sounds like the car I've got in the build.......

I am not too sure Skyline owners are very good at math :) Some of the do this and do that for all less then 25k etc seems waaay optimistic.

I think the GTR will win in most conditions, however I think a rwd platform that is 200kgs lighter can be as quick, if not quicker in some circumstances. There is always the issue of what you can do yourself and what you do with the car. AWD is a pretty big bandaid

It seems that a GTR in rwd form, purpose built that way would more then likely be better then a straight gtst. Purely due to the car having a better all round setup from factory. Slightly wider track, provision to run bigger wheels/tires which is quite important. This is severely limiting in a gtst. The most obvious one being the stance of the gtr makes it looks a hell of alot tougher then a gtst!

Have you seen the stance on my car? I'm running wider track than most GTR's. Not exactly pretty but it's a race car.

Wasn't at all expensive but you probably guessed that :whistling:

I am not too sure Skyline owners are very good at math :) Some of the do this and do that for all less then 25k etc seems waaay optimistic.

I think the GTR will win in most conditions, however I think a rwd platform that is 200kgs lighter can be as quick, if not quicker in some circumstances. There is always the issue

of what you can do yourself and what you do with the car. AWD is a pretty big bandaid

I couldn't agree more with your first paragraph.

It can be done on a tight budget if you rummage around for parts or have heaps of gear lying around.

Those cars end up as shit boxes that never lap near their potential though.

To physically go out and buy parts/knowledge costs.

I've outlined budgets for people then told them to double it to finish the car.

Just to add, I guess if you take the line that you already have a R33 GTR (i.e. like I do) and then you make a decision one way or another. Sorry, just to keep the thread on a lead.

First thread start in this section so please be gentle.

Thinking about track/race only R32/R33/R34 GTR's with no 4WD... is the trade off between the weight lost at the front without the front diff., drive shafts and also transfer case behind the gearbox be a greater advantage over the 4WD grip?

When you consider when you remove the front sump/diff. you could fit a custom shallow dry sump oil pan, without the transfer case you could fit a ex-Supertaxi seq. box without worrying about the transfer case.

The GT cars in Japan were all rear wheel drive only be it for rules or reliability.

What are peoples thoughts?

The trade off for the weight loss of the 4WD system is a slower lap time, ie remove the system and go slower. Dont waste your time just to struggle with the other GTST's.

Oh and by the way the "supertaxi" gearbox is a Holinger. Originally designed to fit in a - wait for it - R32 GTR. True story.

I am not too sure Skyline owners are very good at math :) Some of the do this and do that for all less then 25k etc seems waaay optimistic.

I think the GTR will win in most conditions, however I think a rwd platform that is 200kgs lighter can be as quick, if not quicker in some circumstances. There is always the issue of what you can do yourself and what you do with the car. AWD is a pretty big bandaid

Roy, that post is spot on!

Name a race series where awd has not been outlawed, or is not the only way to win. Sierra was more than 200kgs lighter and had similar hp (towards the end) and got smashed.

ATCC-We all know what happened there

BTCC- awd had about 100kg penalty, then got banned

JGTC- awd outlawed

WRC- 2wd last won a round in late 90s

Superlap- awd dominating..

The list goes on..

Name a race series where awd has not been outlawed, or is not the only way to win. Sierra was more than 200kgs lighter and had similar hp (towards the end) and got smashed.

ATCC-We all know what happened there

BTCC- awd had about 100kg penalty, then got banned

JGTC- awd outlawed

WRC- 2wd last won a round in late 90s

Superlap- awd dominating..

The list goes on..

it also only ran 9" wide tyres while the GTR ran 11" wide tyres, so you can't accurately compare the 2. they were in different classes.

in the rwd vs awd argument it is worth considering the performance/lap times of the rwd porsches vs the awd 911 turbo. you will find that in most cases the 911 turbo (awd) is slower than the lighter, less powerful GT3. have a look through the nurburgring lap times and you will see that the 911 turbo comes in after the GT2 (rwd, but has more power), the carrera GT (obviously) and the GT3 RS (lighter, less pwoerful, RWD)

  • 1 month later...

There are way to many factors here.

Your never going to be able to drive a 800Hp GTS on Hard semi slicks... Obviously the class you want to run in will always be the biggest factor.

Say you do want a high HP GTS to run in Time attack with Semi-Slicks,

The GTS will obviously be struggling with corner exit and to help with this and the over-all drivability of the car you will have to make it squat, move around and soft. In turn reducing the good entry and mid corner speed you have just gained through the RWD platform and even still its going to be a handful, with half the amount of off the corner grip available in a GTR. When setting up a car you can only ever have two of the 3 aspects of a corner (Entry - Mid - Exit), corner exit should always be once of the chosen traits of the car. This will even be a more important trait of a car on semi-slicks because its the hardest trait to set a car up for with minimal grip, hence the domination of 4WD cars in the time attack series. Its interesting many people say 4WD induces understeer, i believe this is a common misconception, possibly caused by bad driving, bad setup, a combination of both or just the wrong style of driving suited best for a 4WD car. Mark Skaife described the Winfield R32 GTR to have the best turn in out of any car he has ever driven, it must also be noted that this car had minimal aero; go figure.

I'm also very doubtful if the GTS will weigh much less than a GTR, with high horsepower applications you will need a GTR rear end, Holinger Box, a solid tail shaft and diff. Brad Sherriffs R32 GTS in race spec, even fully lightened, Carbon Doors Etc, weighs the best part of 1350Kg

There has also been mention of the GT500 cars being RWD, firstly its a requirement, secondly; you must remember in GT500 the cars must be only 500hp and run slicks, making mechanical off the corner grip not the biggest of issues. These cars are also driven by some of the most experienced, accurate, precise and talented drivers in the world. I'm very doubtful that many drivers would have the talent to make a high horsepower GTS fast.

Yes a GTS has a lot of Pros, Reliability, Easier setups, cheaper Etc but for outright speed GTR will always dominate.

who ever "risking" is he sounds wise, experienced and knowledgable, he qoutes you just carnt keep front diffs in them, which is correct in moderate to big hp racecars (650 plus on race tyres) so is if reliablity is an issue (which it is front diff, front shaft) wise then is the subject reffering to 1 lap wonders or time attack style racing?

Out of intrest who has run there gtr at either philip island, calder or sandown?

was just wondering what times you fast guys are rattling out over there now as its been a good couple of years since ive run anything at those track and at the time 1.43 on a radial at the island and 1.16 and sandown and 63 or 4 s was the goods at calder, whats the goods these day

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...