Jump to content
SAU Community

Recommended Posts

  • Replies 231
  • Created
  • Last Reply

Top Posters In This Topic

I was neck and neck with an R35 GTR down the main straight of EC when I only had 320rwkw and im sure his wasnt standard.

So do we think that a properly set up 370rwkw+ 32 gtr would smoke an R35 from a rolling start at 60kph?

So too a standing start if the bloke in the 32 could drive?

I've often thought about this and I've come up with YES

and YES depending if the 35 uses launch control, which I don't think would happen much on the street

the R35 from the factory has proper launch control (full boost before you even start moving) not to mention the larger displacement and much newer tech but it does have a lot of KG on the 32.

without actually doing the test you cant say for sure though.

well what does a 35 run down the quater stock standard? somethin like mid 11's...alot of this good quater mile time can be put down to the launch control

have seen a few 35 run at WSID and they have been high 11's without using the launch by the sound and look of it...

an R32 with 370rwkw+ is potentially a 10 second car

yes i know there are other factors but im talking about a perfect world here

So do we think that a properly set up 370rwkw+ 32 gtr would smoke an R35 from a rolling start at 60kph?

So too a standing start if the bloke in the 32 could drive?

I've often thought about this and I've come up with YES

and YES depending if the 35 uses launch control, which I don't think would happen much on the street

Theres a few clips on Youtube.

Well this in a roll on from 2nd. 600hp R35 v 700hp R34 GTR

So this has gone from a 10 sec RWD R33 GTS-t, to people that don't understand ATTESA.

Now it's onto R35s that have DSG. :laugh:

Surely this is ready for the Wasteland now?

It is.

Quality thread so far...

So this has gone from a 10 sec RWD R33 GTS-t, to people that don't understand ATTESA.

Now it's onto R35s that have DSG. :laugh:

Surely this is ready for the Wasteland now?

Yea well this thread got high jacked ages ago so im gettin in on it

just finnished watchin some other clips on youtube as well, havent seen this one yet

Now it's onto R35s that have DSG. :laugh:

Well the DSG (cough...auto) does give quite a big advantage on the strip, also the R35 GTR has more gears so can make better use of its torque curve. It's almost like a continuously variable transmission.

To sum up, a 10 Rb25 is not all about having the power. Its the potential to get it down on the ground, from the get go. You need the launch, you need the traction, you need the quick smooth gear changes etc. You really cannot compare an R35 to any other manual skyline. Unless you're chuck norris, you can't out shift a DSG. Hell even chuck norris cant do it.

Power to weight will always win in my book

In a quarter mile track awd means nothing.

Most efi comes with launch control

Mine is set to 6.5

Mine was jumping to the left

Lowered the pressure on the right tire and helped alot.

So suspension and tires are destructive counter measures against awd cars.

I sure fear no awd car out there.

They are top prey in my food chain. ;)

So u drive around the street with less tyre pressure in your rear right tyre?

Or do u just jump out and lower it when ur at the lights after pulling up next to a GTR

This thread has come a long way from the first page, maybe he didn't read the OP where it was talking about street tires and full weight.

None the less it is a true statement. Ive seen some videos of VL's and rotors make some pretty quick passes with street tyres. The VL is a fat sloppy car while the rotors are generally fitted into a chassis which weights easily under a ton.

Fat as in they can in no way be compared to skylines in terms of their suspension work. My cousin has a VL which ran 12's or 11's and it had almost no suspension work. Fat as in when you smack the brake it rocks like a boat and handles like a boat. Skylines might be big and heavy but they really do not handle like boats. They are 1250Kg, 100kg lighter than my GTST.

Edited by SargeRX8

I think that's why they are good for drags straight out of the box though, the soft wallowing suspension aids in the rear squatting and the front lifting, whereas the Skylines with there sporty suspension is a bit to firm for hooking up.

Although the VL does handle a bit more like the Queen Mary when going around corners.

I think, LOL.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So been ocd with timing mark but checked from few angle and seems both cam are on and crank is matching as well to the slot on sump and crank pully   i noticed crankshaft cover has been robbed as per attached pic. Any ideas why? Could my balancer or harmonic be on its way out? should I replace the cover? https://ibb.co/ZR1JFYRR
    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
×
×
  • Create New...