Jump to content
SAU Community

Recommended Posts

Went to get my R33 GTST rego inspection done, the dude points out that when the headlights are on, the outer lights shine.

But, when the high beams are turned on the outer lights turn off, and the inner lights turn on.

Said that it's illegal, he let it go though. But, said that i need to get it looked at when i get the car tuned next.

Is it standard for the lights to work this way or has someone been playing with the car before i owned it?

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/
Share on other sites

On high beam yes, both low beam + high beam are supposed to come on together = complete set.

No!

In skylines it's normal for the low beam to turn off when the high beam is flicked on,. But if it is still a concern you can modify the wiring to make them stay on

Yes!

Perfectly normal behaviour, not just in skylines but in pretty much every car. Generally the 2 lights (low and high) are not designed to work together.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188638
Share on other sites

As Duncan mentions, it is normal operation for any vehicle.

Depending on how good your eye sight is, on cars that run a double filament globe instead of two separate bulbs, you can even see that the filaments change which one is emitting light.

On dual globed cars it's super easy.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188698
Share on other sites

As Duncan mentions, it is normal operation for any vehicle.

Depending on how good your eye sight is, on cars that run a double filament globe instead of two separate bulbs, you can even see that the filaments change which one is emitting light.

On dual globed cars it's super easy.

as an extension to this, car like falcadores, switch the outer filament, and the inner globes also come on, giving 4 hi beam globes at the same time.

cars without the dual filament globe generally just switch.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188778
Share on other sites

On high beam yes, both low beam + high beam are supposed to come on together = complete set.

Ian, you've asked how mine work (in your subtitle).

In every 3x R34 GT-Rs I've had,...

* all four lights come on when the stalk is switched from low beam to high beam.

* upon flashing high beam, the low beams stay off & the high beams come on (probably to save the Xenons).

In my former R33 GT-R (series 1 without Xenons), I cannot recall.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6188801
Share on other sites

Ian, you've asked how mine work (in your subtitle).

In every 3x R34 GT-Rs I've had,...

* all four lights come on when the stalk is switched from low beam to high beam.

* upon flashing high beam, the low beams stay off & the high beams come on (probably to save the Xenons).

In my former R33 GT-R (series 1 without Xenons), I cannot recall.

Yeah this is basically right; on our R34s, when you have the dipped (low) beam headlights on, if you then switch to high beam OR flash the high beams the low beam will stay on. In our case they're xenons.

If you have either just the parking lights or no lights on at all, then flash your high beams, the low beams ALSO come on. AFAIK this is a factory setting for R34s. I don't reckon it's a great idea though as xenons (HIDs) don't like to be turned off and on quickly as it'll burn them out faster.

On our R33s, the low beam would turn off when switching from low beam to high beam. Never had a problem with rego though. I think your 'shop is just being picky but at least he let you go with it.

In most of our other cars the low beam stays on when you switch to high beam; and only the high beam comes on if you flash the headlights with no other headlights on.

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6189847
Share on other sites

BTW just to clarify legality - all skyline xenons (to 34 at least, maybe 35 and 36 as well) are removed at compliance as they do not meet ADRs. If you have a skyline with them, they were refitted after compliance (or never removed :spank:)

Link to comment
https://www.sau.com.au/forums/topic/388267-high-beams/#findComment-6189981
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...