Jump to content
SAU Community

Recommended Posts

Hi guys,

i got a quote from Jem in ingleburn for $2650 to install and tune Haltech ultimate pro in my r33 gtst. I am getting rid of the air flow meter

and the old setup with emange. i do have stage 2 modifications and just want some opinion. Even better a group install to reduce the cost.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/389022-haltech-tuners-quote/
Share on other sites

Every car is slightly different, so whatever you get quoted could quite possibly be very different to what someone else will be quoted due to mods, condition of car (will any other work be required to make sure it's running at its best before and after the tune), accessories fitted (different injectors, fuel pumps, surge tanks, etc.).

gts-t -> i wouldn't bother with the haltech unless you have a stupid amount of power or are extremely anal about your fuel/air ratio. Buy a power FC or link G4 ( i have one that im willing to part with :-) ).

It will save you money and much more people are around to dyno tune them.

gts-t -> i wouldn't bother with the haltech unless you have a stupid amount of power or are extremely anal about your fuel/air ratio. Buy a power FC or link G4 ( i have one that im willing to part with :-) ).

It will save you money and much more people are around to dyno tune them.

tell me more cost install and tune and reliabilty. i just want to get rid of the afm too many issues.

thanks

tell me more cost install and tune and reliabilty. i just want to get rid of the afm too many issues.

thanks

Power FC is good, but Haltec is better in most ways. Hower from reading this forum and my own experiance Haltech do tend to be a little picky if you have electrical issues (one unit will work fine in one car but in another it can become more difficult).

I would not buy a power FC if you want to remove AFM's though. The basic model does not allow it and the dejetro can apparently be a pain to tune and costs as much as a new Haltech/Vipec.

Don't pay stupid amounts of money for this stuff unless you are going for a full house drag engine.

I have an RB25DET in my HR31 and have just had a Z32/Nistune installed and dyno tuned for $800. Picked up another 30Kw and it has everything you need for a full motor upgrade.

Uses the AFM though. I agree it would be nice to get rid of it but not for another $2000!

What's wrong with the AFM? What's so stupid about it? I prefer AFM tuning over MAP because you don't have that untunable spot between -ve and +ve manifold pressure. If you don't run silly useless BOVs I can't see why the AFM is such a problem. Even so, you can easily compensate for it with the fuel deceleration adjustment.

I just paid $1500 - Instal and tune Haltech Sports 2000 from scratch. Zip programming on the unit.

That's in the ACT so your being ripped.

Appologies if that is purchase, install and tune - then it's an awesome price.

  • 2 months later...

Appologies if that is purchase, install and tune - then it's an awesome price.

It WILL be purchase and install as i have a quote for the PS2000 completely wired into my R34 with wideband and tune and its not much more than the pricing above...

JEM are one of the best Haltech tuners around and if you want a premium job that you will be happy with i suggest you spend the money once and do it right.

I had a Power FC and had no issues with it but ditched it in favour for the Haltech due to the mods and E85 etc... But for most road cars a Power FC will do the job fine.

I have done so much research on ECU's lately and all seem to have heaps of PROS and not many CONS, but it all depends on the application you want it for i guess.

The guys at JEM have done a few mates cars now and will be doing mine and a couple of others very soon, we drive 3hrs just to get there simply because they are so helpful, pricing is good and they have an awesome reputation.

Adam is one of the best when it comes to Haltech from everything i've been told and the mates that have gone have been REALLY happy :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...