Jump to content
SAU Community

Recommended Posts

Picked up the car today, I can't believe how good the car feels with 300+ kw, it's now feeling like a skyline should :D am still on low boost and up to E49 fuel, so 325rwkw roughly I think... NO traction in first few gears but it's SO nice to drive.... Boys have done an amazing job!!

Can't wait to try high boost 4 the lolz :D

Will post a dyno sheet later... For now I'll be enjoying learning the new found power...

Massive smiles though :yes:

you want lolz.. drive it in the wet..... :yes:

then when your doing 100 on the freeway just squeeze the throttle a little ;)

Yeah I'm a bit worried about that... It comes onto boost so strong, it's just gate and wheelspin if you plant it... :)

seriously............who cares :D

but most of the time on the street your off boost anyway so dont really use alot more fuel than normal...

get into it hard and it will start using juice pretty quick of course

this, it's not for economy!haha

Just a quick question, what sort of fuel consumption are you guys getting with 300+ atw?

How do you intend to drive? Economicaly or not?

With 370rwkw I could get 450km/s to a tank in my GTS-R (and the tanker GTR i managed over 600kms on a fwy with 330rwkw).

Also managed 200km/s to a tank regularly in the GTS-R and GTR.

So as usual - it's all in your right foot, and the tune. Either way if you are worried about economy, buy a Prius

hahaha fuel economy questions make me lol :)

I rented an SRT-10 Dodge Viper in Vegas this year and chewed through 60L of gas and only did 85miles :D Im guessing that had NOTHING to do with my driving though? hehehe.

Mine is 280-300rwkw depending on the dyno, and i still get 550 a tank if im relatively nice to it. On a flat piece of highway i have got as good as 14km/L. I thought that was absolutely fantastic! But then the flat plains run out and it all went to shit in the twisty hilly stuff for the rest of the country. AFR's in the 14.3 - 14.7 on cruise @ 100km/h, and 11.6 - 11.8 full noise. (98octane)

Hehe yeah i know. Its just entertaining for me for some reason. Small things..

I asked my dads friend what the economy was like in his Bentley Continental last year for shits, and he turned around and said "Son, i didnt spend $300K on a car to worry about how much it costs to fill the tank" LOL!

hahaha fuel economy questions make me lol :)

I rented an SRT-10 Dodge Viper in Vegas this year and chewed through 60L of gas and only did 85miles :D Im guessing that had NOTHING to do with my driving though? hehehe.

Mine is 280-300rwkw depending on the dyno, and i still get 550 a tank if im relatively nice to it. On a flat piece of highway i have got as good as 14km/L. I thought that was absolutely fantastic! But then the flat plains run out and it all went to shit in the twisty hilly stuff for the rest of the country. AFR's in the 14.3 - 14.7 on cruise @ 100km/h, and 11.6 - 11.8 full noise. (98octane)

How can you people get such good fuel economy with 300ish rwkw? My daily driver R34 200rwkw ALWAYS gets 19-20L/100kms, it is seriously REALLY f*ked. My right foot is not too bad, just the ocassional squirt to 5-7k rpms in 1st, 2nd and 3rd lasting less than 10 seconds.

I asked my dads friend what the economy was like in his Bentley Continental last year for shits, and he turned around and said "Son, i didnt spend $300K on a car to worry about how much it costs to fill the tank" LOL!

hahaha that's awesome

How can you people get such good fuel economy with 300ish rwkw? My daily driver R34 200rwkw ALWAYS gets 19-20L/100kms, it is seriously REALLY f*ked. My right foot is not too bad, just the ocassional squirt to 5-7k rpms in 1st, 2nd and 3rd lasting less than 10 seconds.

I dont see how the power level really matters. Its only the amount of time you spend with it heavily loaded that matters. With a good economy tune for normal driving, and i rate my economy tune very highly, it should be more economical than it was when it rolled out the factory door :) Or dam close to it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...