Jump to content
SAU Community

Recommended Posts

that is a meaty looking power curve! What setup are you running again? 6boost high mount twin scroll with a gt3076 running dual wastegates wasnt it?

Did you up the boost or just leave it on 18psi?

Edited by Mitcho_7

How would you compare them to KU36 in terms of life and grip?

I have RSR at the moment and they have lasted almost 10,000kms but the grip was substantially reduced after ~5000km

I've not used a KU36, others i know have - and were not particularly impressed... However for the price, it was ok.

However the price has gone up recently, making them a not-so-good option now for thier price. If you have RS-R, i'd stay with them or go AD08

that is a meaty looking power curve! What setup are you running again? 6boost high mount twin scroll with a gt3076 running dual wastegates wasnt it?

Did you up the boost or just leave it on 18psi?

+1?

.....it's in 25 dyno results

Edited by WMDC35

Fuel economy, I get 500 to a tank no problem. Never run out , probably get even more if I pushed it.

One thing I will ask though:

How's your oil consumption with 300?, mine has increased to a litre every 2000km now!!! When I was on 250rwkw it was prettty much zero.

Edit: Forgot to say, I have a catchcan and its pretty much empty after +10,000km. Nil leaks either so its burning, but you can't smell it or see it.

And oil is Castrol Edge Sport 10w-60 fully synthetic.

Fuel economy, I get 500 to a tank no problem. Never run out , probably get even more if I pushed it.

One thing I will ask though:

How's your oil consumption with 300?, mine has increased to a litre every 2000km now!!! When I was on 250rwkw it was prettty much zero.

Edit: Forgot to say, I have a catchcan and its pretty much empty after +10,000km. Nil leaks either so its burning, but you can't smell it or see it.

And oil is Castrol Edge Sport 10w-60 fully synthetic.

Thats some frequent top ups for a car thats so good on fuel, even after hours on the dyno my oil level doesnt fall , gets very dark looking though, try some Mobil 1 instead...

is it possible the oil rings have broken?

Edited by SliverS2

I used to get 500 to a tank and used a litre every 1500-2000 with almost no visible smoke. Used 5 litres from Perth to gold coast(4450)

When pulling it down 5 ringlands were broken. Was like that for 90000. Was around 230kw.

I used to get 500 to a tank and used a litre every 1500-2000 with almost no visible smoke. Used 5 litres from Perth to gold coast(4450)

When pulling it down 5 ringlands were broken. Was like that for 90000. Was around 230kw.

LOL you deserve a medal for this. 5 Broken ring lands, drove it for 90 thou and from Perth to GC.

You Sir are Awesome.

LOL you deserve a medal for this. 5 Broken ring lands, drove it for 90 thou and from Perth to GC.

You Sir are Awesome.

It never died and I would have continued to drive it but I got a company car so decided to take it off the road for a while. Had 115-120psi compression

Oh and Per-GC and return, both ways non-stop apart from fuel. It loved it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No requirement for JDM vehicles,  which the 33 is, maroney label only needed in the US market for new cars I believe (Federal law stuff) Google knows all
    • Hopefully you can just unbolt them, thank them for their service, then bin them and not replace them Apparently the sensors like to set them off with only minor impacts at low speed It looks like they do a delete kit for some of these, but, it is costly 
    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
×
×
  • Create New...