Jump to content
SAU Community

Recommended Posts

that is a meaty looking power curve! What setup are you running again? 6boost high mount twin scroll with a gt3076 running dual wastegates wasnt it?

Did you up the boost or just leave it on 18psi?

Edited by Mitcho_7

How would you compare them to KU36 in terms of life and grip?

I have RSR at the moment and they have lasted almost 10,000kms but the grip was substantially reduced after ~5000km

I've not used a KU36, others i know have - and were not particularly impressed... However for the price, it was ok.

However the price has gone up recently, making them a not-so-good option now for thier price. If you have RS-R, i'd stay with them or go AD08

that is a meaty looking power curve! What setup are you running again? 6boost high mount twin scroll with a gt3076 running dual wastegates wasnt it?

Did you up the boost or just leave it on 18psi?

+1?

.....it's in 25 dyno results

Edited by WMDC35

Fuel economy, I get 500 to a tank no problem. Never run out , probably get even more if I pushed it.

One thing I will ask though:

How's your oil consumption with 300?, mine has increased to a litre every 2000km now!!! When I was on 250rwkw it was prettty much zero.

Edit: Forgot to say, I have a catchcan and its pretty much empty after +10,000km. Nil leaks either so its burning, but you can't smell it or see it.

And oil is Castrol Edge Sport 10w-60 fully synthetic.

Fuel economy, I get 500 to a tank no problem. Never run out , probably get even more if I pushed it.

One thing I will ask though:

How's your oil consumption with 300?, mine has increased to a litre every 2000km now!!! When I was on 250rwkw it was prettty much zero.

Edit: Forgot to say, I have a catchcan and its pretty much empty after +10,000km. Nil leaks either so its burning, but you can't smell it or see it.

And oil is Castrol Edge Sport 10w-60 fully synthetic.

Thats some frequent top ups for a car thats so good on fuel, even after hours on the dyno my oil level doesnt fall , gets very dark looking though, try some Mobil 1 instead...

is it possible the oil rings have broken?

Edited by SliverS2

I used to get 500 to a tank and used a litre every 1500-2000 with almost no visible smoke. Used 5 litres from Perth to gold coast(4450)

When pulling it down 5 ringlands were broken. Was like that for 90000. Was around 230kw.

I used to get 500 to a tank and used a litre every 1500-2000 with almost no visible smoke. Used 5 litres from Perth to gold coast(4450)

When pulling it down 5 ringlands were broken. Was like that for 90000. Was around 230kw.

LOL you deserve a medal for this. 5 Broken ring lands, drove it for 90 thou and from Perth to GC.

You Sir are Awesome.

LOL you deserve a medal for this. 5 Broken ring lands, drove it for 90 thou and from Perth to GC.

You Sir are Awesome.

It never died and I would have continued to drive it but I got a company car so decided to take it off the road for a while. Had 115-120psi compression

Oh and Per-GC and return, both ways non-stop apart from fuel. It loved it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...