Jump to content
SAU Community

Recommended Posts

that is a meaty looking power curve! What setup are you running again? 6boost high mount twin scroll with a gt3076 running dual wastegates wasnt it?

Did you up the boost or just leave it on 18psi?

Edited by Mitcho_7

How would you compare them to KU36 in terms of life and grip?

I have RSR at the moment and they have lasted almost 10,000kms but the grip was substantially reduced after ~5000km

I've not used a KU36, others i know have - and were not particularly impressed... However for the price, it was ok.

However the price has gone up recently, making them a not-so-good option now for thier price. If you have RS-R, i'd stay with them or go AD08

that is a meaty looking power curve! What setup are you running again? 6boost high mount twin scroll with a gt3076 running dual wastegates wasnt it?

Did you up the boost or just leave it on 18psi?

+1?

.....it's in 25 dyno results

Edited by WMDC35

Fuel economy, I get 500 to a tank no problem. Never run out , probably get even more if I pushed it.

One thing I will ask though:

How's your oil consumption with 300?, mine has increased to a litre every 2000km now!!! When I was on 250rwkw it was prettty much zero.

Edit: Forgot to say, I have a catchcan and its pretty much empty after +10,000km. Nil leaks either so its burning, but you can't smell it or see it.

And oil is Castrol Edge Sport 10w-60 fully synthetic.

Fuel economy, I get 500 to a tank no problem. Never run out , probably get even more if I pushed it.

One thing I will ask though:

How's your oil consumption with 300?, mine has increased to a litre every 2000km now!!! When I was on 250rwkw it was prettty much zero.

Edit: Forgot to say, I have a catchcan and its pretty much empty after +10,000km. Nil leaks either so its burning, but you can't smell it or see it.

And oil is Castrol Edge Sport 10w-60 fully synthetic.

Thats some frequent top ups for a car thats so good on fuel, even after hours on the dyno my oil level doesnt fall , gets very dark looking though, try some Mobil 1 instead...

is it possible the oil rings have broken?

Edited by SliverS2

I used to get 500 to a tank and used a litre every 1500-2000 with almost no visible smoke. Used 5 litres from Perth to gold coast(4450)

When pulling it down 5 ringlands were broken. Was like that for 90000. Was around 230kw.

I used to get 500 to a tank and used a litre every 1500-2000 with almost no visible smoke. Used 5 litres from Perth to gold coast(4450)

When pulling it down 5 ringlands were broken. Was like that for 90000. Was around 230kw.

LOL you deserve a medal for this. 5 Broken ring lands, drove it for 90 thou and from Perth to GC.

You Sir are Awesome.

LOL you deserve a medal for this. 5 Broken ring lands, drove it for 90 thou and from Perth to GC.

You Sir are Awesome.

It never died and I would have continued to drive it but I got a company car so decided to take it off the road for a while. Had 115-120psi compression

Oh and Per-GC and return, both ways non-stop apart from fuel. It loved it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...