Jump to content
SAU Community

Recommended Posts

Hey can I join the club?

Just upgraded to Deatschwerks 950cc injectors and retuned for E85

Very happy with the results!

From 274rwkw (98) to 314rwkw (E85) with a massive increase in mid-range power

Pushing 500HP and very responsive - full boost by 3250rpm

post-52301-0-98109800-1404807442_thumb.jpg

This is an overlay of the E85 and 98PULP dyno results on exactly the same set up (100% unopened) apart from the injectors & tune.

First time posting and I'm not sure If this is the best place to post..

I've got a RB25de neo 6 R34

100 000kmspost-135582-14054799325913_thumb.jpg

With a

AIResearch T60 T04E turbo

Externally gated on a slide industries manifold

700cc Bosch injectors

Apexi power FC

Bosch 044

Apexi FMIC

3inch stainless turbo back exhaust

Cometic head gasket

Arp studs

FFP

How much would I expect to see out of it?

How much boost could I push?

Could I run 300kw with that setup as a daily?

  • 2 weeks later...

rb25 neo

t67 10cm

880cc sards

sard reg

greddy rail

tomei type b

greddy intake

npc cushioned clutch

oil accumulator

oil cooler

3" straight trough

stock head gasket

98 bp

340 @17 psi graph in dyno thread

Unopened rb25 neo

Holset hx35 turbo

Chinese manifold

Custom intake manifold

Denso -850cc injectors

Turbonetics 44mm gate

3 inch exhaust

Spitfire coils

Sard fpr

Both 044 an 040

Z32 afm

Power fc

Car makes 304kw atw on 16 pound an 279Kw atw on only 12 pound

post-119725-0-64273200-1407021544_thumb.jpg

  • 8 months later...

1998 Nissan Skyline R33 Gts2.5t


40th Anniversary Edition.


Mechanical Nismo Selective 1.5 L.S.D. diff


Nismo G Max II clutch


Bilstein shocks with King springs


Whiteline adjustable swaybars front and rear


Whiteline adjustable nolethene bushes for camber/castor/toe at all four wheels


HKS triple layer dry pod filter


Z32 Mass Air Flow Meter


Sard adjustable fuel pressure regulator


555 Nismo injectors


Splitfire coils


Blitz 700x600x70 fmic (anodised blue)


HKS IV electronic vacuum controller (boost controller)


Blitz turbo timer


Trust alloy oil cooler with stainless steel braided lines


Apexi alloy radiator


Cusco high pressure radiator cap


D1 oil catch can


Master cylinder brake brace stop bracket


Project mU front discs [brakes]


Braided stainless steel brake hoses [full kit]


90mm exhaust with HKS Hiper 120mm s/s muffler


Cusco front tower strut bar


Snow Performance Stage 3 Boost Cooler water/meth injection kit


Garrett GT3076 WG turbo with 100mm port shrouded comp cover


HKS 40mm external wastegate [18psi spring rate]


HKS cast low mount manifold extrude honed and flowed


Tomei adjustable exhaust cam pulley


Tomei Poncams 256 degrees/8.5mm lift


Apexi Power Full Computer with Hand Controller



Making 302, so just snuck in, chart is in Dyno thread.


Apologies for the crappy format, I cut and pasted from a word file and CBF fixing it.

oh hai... forgot I made it into this club a while ago...

343kW on 1.65bar of boost (Mainline Dyno) on E85

Stock Motor, Stock Cams, Stock Head, Stock Manifold (Intake & Exhaust)

Hypergear SS2 (internal gate welded shut & 3" v-band exhaust)

Scotty Custom 45mm External Gate Mod on Turbo Housing

Turbosmart 45mm Hypergate External Wastegate

875cc Siemen DEKA IV Top Feed Injectors

Sard (fake I think) Fuel Pressure Regulator

Walbro 450L Fuel Pump

Splitfire Coilpacks

Hybrid FMIC

Plazmaman Swept Back Cooler Piping

Typical 3" Exhaust System (1x Resonator, 1x Mid Muffler, 1x Fujitsubo Rear Oval Muffler) & Screamer Pipe :)

Adaptronic ECU, self tuned

  • 3 weeks later...

Look at where the power curve is going. Straight over 400rwhp. Dyno cuts out. They are getting me back for a power run to have a full graph. This will give you an idea.

post-96233-0-20807300-1431143693_thumb.jpg

Look at where the power curve is going. Straight over 400rwhp. Dyno cuts out. They are getting me back for a power run to have a full graph. This will give you an idea.

HAHA that predictor is awesome, it's making on average a few hp more up to when the "dyno cuts out" but somehow it's going to gain 30hp? 405rwhp would be more on the money

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...